XQ425

  • Overview
  • View product Download

FUEL/EMISSIONS STRATEGY

Meets U.S. EPA Tier 4 Final and CARB Certified for Non-Road Mobile applications at all 50 and 60 Hz ratings

SINGLE-SOURCE SUPPLIER

Factory designed and fully prototype tested with certified torsion vibration analysis available

CAT® C13 Tier 4 Final DIESEL ENGINE

Utilizes ACERT™ Technology and Cat NOx Reduction System (NRS)

CAT CEM (Clean Emissions Module)

Aftertreatment module consists of Diesel Oxidation Catalyst (DOC), Diesel Particulate Filter (DPF), and Selective Catalytic Reduction (SCR)

DIESEL EXHAUST FLUID (DEF) Tank

12 gallon DEF tank with on tank fill and integrated pump, level sensor and heating elements

CAT EMCP 4.2 CONTROL PANEL

Fully featured power metering, protective relaying and engine/generator control and monitoring

CAT SR4B SERIES GENERATOR

Designed to match performance and output characteristics of Cat diesel engines

CAT DIGITAL VOLTAGE REGULATOR (Cat

Three-phase sensing<

ENCLOSURE

Highly corrosion resistant 12 gauge sheet steel construction

DISTRIBUTION PANEL

Switchable via linkboard from 480/277V 3 phase to 240/139V 3 phase (can be adjusted down to 208/120V 3 Phase)

REAR CUSTOMER ACCESS

Separate control panel and distribution panel access doors

REDUCED ENVIRONMENTAL IMPACT

EPA Tier 4 Final technology

  • 110% spill containment of onboard engine fluids

    RENTAL READY FEATURES

    Anti-condensation heater 110-120 VAC

  • Generator
    Rating 375 ekW (470 kVA) Standby
    Frequency 50/60 Hz
    Voltage 208 - 600 V
    Prime Rating 340 kW
    Engine
    Fuel Requires ULSD
    Dimensions
    Height - With Trailer 3204 mm (126.1 in)
    Height - Without Trailer 2642 mm (104 in)
    Length - With Trailer 7206 mm (283.7 in)
    Length - Without Trailer 5080 mm (208.7 in)
    Weight - With Trailer, Lube, Oil and Coolant 8132 kg (17930 lb)
    Weight - Without Trailer, With Lube Oil and Coolant 6667 kg (14700 lb)
    Width - With Trailer 2591 mm (102 in)
    Width - Without Trailer 1524 mm (60 in)
    Engine
    Cat® Diesel Engines C13 ATAAC, I-6 4-stroke water cooled diesel

    Standard Equipment

    • Air Inlet
      • Air cleaner, two stage cyclonic/paper with dust cup and service indicator
    • Charging System
      • UL/CSA listed 120 V, 20 Amp battery charger, shock mounted and enclosed in dust proof housing
    • Control Panel
      • EMCP 4.2 genset mounted controller
    • Cooling System
      • Package mounted radiator with vertical air discharge provides 43° C ambient capability at prime +10% rating
    • Distribution System
      • NEMA 1 steel enclosure, separate hinged, lockable door with rust resistant pinned hinges
    • Enclosure
      • Sound attenuating, 12 gauge sheet metal enclosure limits overall noise to 77 dB(A) @ 7m (23′)
    • Engine
      • EPA Tier 4 Final certified Cat C13 ATAAC heavy duty diesel engine
    • Clean Emissions Module
      • Cat Clean Emissions Module comes with integrated DOC, DPF & SCR and is located in separate compartment
    • DEF System
      • 12 gal plastic DEF tank provides 24 Hrs run time @ 75 % Prime + 10% rating similar to fuel system. DEF tank is equipped with integrated pump, level sensor to display the DEF level in EMCP panel and electrically heated lines from DEF tank to CEM. Equipped with Low and critically low level alarms with a critically low shutdown
    • Fuel System
      • 520 gal (1970 L) double wall fuel tank, UL142, ULC, and Transport Canada certified, 27 hr runtime @ 75% prime +10% rating, internal fuel fill
    • Generator
      • SR4B 450 frame, three-phase, random wound, 12-lead design, permanent magnet excited, 0.750 pitch
    • Lube System
      • Pump, integral oil cooler, lube oil, filter, filler and dipstick, and oil sampling valve
    • Mounting System
      • Generator set soft mounted to the heavy duty, fabricated steel base frame
    • Starting System
      • Single electric starting motor, 24V
    • General
      • Canadian Standards Authority (CSA) certified

    Optional Equipment

    • CAT EMCP 4.4 CONTROL PANEL
      • Simple user friendly interface and navigation
      • Automatic set-point adjustment integrated with voltage and frequency selection
      • UL508A recognized
      • Convenient service access for Cat Service tools (not included)
      • Integration with the Cat DVR provides enhanced system monitoring
      • Ability to view and reset diagnostics of all controls networked on primary CAN datalink eliminates need for separate service tools for troubleshooting
      • True RMS AC metering, 3 phase
      • Multiple stored setpoint group selection via switched input eliminates need to reprogram control when switching voltages and frequencies
    • EMCP 4.4 ENGINE OPERATOR INTERFACE
      • Controls
      • Digital indication for
      • Shutdowns with common indicating light for
      • Emergency stop pushbutton
      • Panel illuminating lights
      • Display navigation keys including two shortcut keys for Engine Parameters, Generator Parameters, Control and main menu
      • Fuel level monitoring and control
    • EMCP 4.4 GENERATOR PROTECTIVE RELAYING
      • Generator protective features provided by EMCP 4.4
    • MODES OF OPERATION
      • Provides for
      • Single Unit Stand-Alone Mode
      • Multi-Unit Mode

    Enquiry Form

    REQUEST A CALL BACK