360°Exterior View

G3616 A4 Gas Compression Engine

  • Overview
  • View product Download
CALCULATE FINANCE

Emissions

Meets U.S. EPA Spark Ignited Stationary NSPS Emissions for 2010/11 with the use of an oxidation catalyst

Lean Burn Engine Technology

Lean-burn engines operate with large amounts of excess air. The excess air absorbs heat during combustion reducing the combustion temperature and pressure, greatly reducing levels of NOx. Lean-burn design also provides longer component life and excellent fuel consumption

Ease of Operation


 - High-strength pan and rails for excellent mounting and stability
 - Side covers on block allow for inspection of internal components

Advanced Digital Engine Management

ADEM A3 engine management system integrates speed control, air/fuel ratio control, and ignition/detonation controls into a complete engine management system. ADEM A3 has improved: user interface, display system, shutdown controls, and system diagnostics.

Full Range of Attachments

Large variety of factory-installed engine attachments reduces packaging time.

Testing

Every engine is full-load tested to ensure proper engine performance

Gas Engine Rating Pro

GERP is a web-based program designed to provide site performance capabilities for Cat® natural gas engines for the gas compression industry. GERP provides engine data for your site’s altitude, ambient temperature, fuel, engine coolant heat rejection, performance data, installation drawings, spec sheets, and pump curves.

Product Support Offered Through Global Cat Dealer

More than 2,200 dealer outlets Cat factory-trained dealer technicians service every aspect of your petroleum engine Cat parts and labor warranty Preventive maintenance agreements available for repairbefore-failure options S•O•SSM program matches your oil and coolant samples against Caterpillar set standards to determine:
 - Internal engine component condition
 - Presence of unwanted fluids
 - Presence of combustion by-products
 - Site-specific oil change interval

Over 80 Years of Engine Manufacturing Experience

Over 60 years of natural gas engine production Ownership of these manufacturing processes enables Caterpillar to produce high quality, dependable products
 - Cast engine blocks, heads, cylinder liners, and flywheel housings
 - Machine critical components
 - Assemble complete engine

Web Site

For all your petroleum power requirements, visit www.catoilandgasinfo.com.

Web Site

For all your petroleum power requirements, visit www.catoilandgasinfo.com.

Engine Specifications
Maximum Rating 3990 bkW (5350 BHP)
Emissions NSPS Site Compliant Capable
Displacement 339 l (20698 inu00b3)
Minimum Rating 3729 bkW (5000 BHP)
Compression Ratio 9.2:1
Aspiration Turbocharged-Aftercooled
Rotation from Flywheel End Counterclockwise
Flywheel Teeth 255
Weight - Dry 32659 kg (72000 lb)
Oil Change Interval 5000 hours
Ignition, Protection Electronic, ADEM™ A4
Stroke 300 mm (11.8 in)
Bore 300 mm (11.8 in)
Capacity for Liquids
Cooling System 798 l (211 gal (US))
Lube Oil System - Refill 1329 l (351 gal (US))

Standard Equipment

  • Air Inlet System
    • Air cleaner — standard duty
    • Inlet air adapter
  • Control System
    • A4 control system — provides electronic governing integrated with air/fuel ratio control and individual cylinder ignition timing control
  • Cooling System
    • Jacket water pump
    • Jacket water thermostats and housing
    • Aftercooler pump
    • Aftercooler water thermostats and housing
    • Single-stage aftercooler
  • Exhaust System
    • Dry wrapped exhaust manifolds
    • Vertical outlet adapter
  • Flywheel & Flywheel Housing
    • SAE standard rotation
  • Fuel System
    • Gas supply and and shut-off valves — electronically controlled fuel supply pressure
  • Ignition System
    • A4 control system — senses individual cylinder detonation and controls individual cylinder timing
  • Instrumentation
    • LCD display panel — monitors engine parameters and displays diagnostic codes
  • Lube System
    • Crankcase breathers — top mounted
    • Oil cooler
    • Oil filter
    • Oil pan drain valve
  • Mounting System
    • Engine mounting feet (six total)
  • Protection System
    • Electronic shutoff system with purge cycle
    • Crankcase explosion relief valves
    • Gas shutoff valve
  • Starting System
    • Air starting system
  • General
    • Paint — Cat yellow
    • Vibration dampers

Optional Equipment

  • Air Inlet System
    • Heavy-duty air cleaner with precleaners
  • Charging System
    • 35 Amp & 65 Amp charging alternators – CSA approved
  • Exhaust System
    • Flexible bellows adapters
    • Exhaust expander
    • Weld flanges
  • Fuel System
    • Fuel filter
    • Gas pressure regulator
    • Flexible connection
    • Flexible connection
  • Instrumentation
    • Remote data monitoring and speed control
    • Compatible with Cat Electronic Technician (ET) and Data View
    • LCD display panel
    • Color HMI display
    • Modbus and Ethernet capable
  • Lube System
    • Air or electric motor-driven prelube
    • Duplex oil filter
  • Mounting System
    • Mounting plates (set of six)
  • Power Take-Offs
    • Front stub shafts
  • Starting System
    • Air pressure reducing valve
    • Natural gas starting system
  • General
    • Engine barring device
    • Damper guard

Enquiry Form

    REQUEST A CALL BACK
    This site is protected by reCAPTCHA and the Google Privacy Policy and Terms of Service apply.