Enquire about "DG200-2 (3 phase)" Now
DG200-2 (3 phase)
Engine
- Four-stroke-cycle gas engine combines consistent performance and excellent fuel economy with minimum weight
Generator
- Matched to the performance and output characteristics of Cat engines
- Industry leading mechanical and electrical design
- Industry leading motor starting capabilities
- High Efficiency
EMCP Control Panel
- User-friendly interface and navigation
- Scalable system to meet a wide range of installation requirement
- Expansion modules and site-specific programming for specific customer requirements
Design Criteria
- The generator set facilitates compliance with NFPA 110 and meets ISO 8528-5 requirements for transient response
- Cooling system designed to operate in 50˚C/122˚F ambient temperatures with an air flow restriction of 0.5 in. water
UL 2200 / CSA
- Optional
- UL 2200 Listed packages
- CSA Certified
- Certain restrictions may apply
- Consult with your Cat® Dealer
Worldwide Product Support
- Cat dealers have over 1,800 dealer branch stores operating in 200 countries
- Your local Cat dealer provides extensive post-sale support, including maintenance and repair agreements
| Generator Set Specifications | |
|---|---|
| Frequency | 60 Hz |
| Natural Gas Rating | 200 eKW |
| Emissions/Fuel Strategy | U.S. EPA Certified for Non-Emergency Application |
| Engine Specifications | |
|---|---|
| Engine Model | 14.2 L, Inline 6, 4 Cycle, Spark - Ignited |
| Generator Set Specifications | |
|---|---|
| Displacement | 14.17 l (864.71 in) |
| Engine Specifications | |
|---|---|
| Fuel System | Carburetor, Down Draft |
| Generator Set Specifications | |
|---|---|
| Fuel Type | Natural Gas |
| Speed | 1800 rpm |
| Engine Specifications | |
|---|---|
| Aspiration | Turbocharged-Aftercooled |
| Governor Type | Electronic |
| Compression Ratio | 9.5:1 |
| Bore | 134.87 mm (5.31 in) |
| Stroke | 165.1 mm (6.5 in) |
| Generator Set Dimensions | |
|---|---|
| Length | 3250 mm (127.95 in) |
| Width | 1344.5 mm (52.93 in) |
| Height | 1711.2 mm (67.37 in) |
| Weight | 2610.9 kg (5756 lb) |
Standard Equipment
- Cooling
- Closed coolant recovery system
- Factory-installed radiator
- 50/50 Ethylene glycol antifreeze
- Radiator and cooling fan complete with protective guards
- Standard ambient temperatures up to 50°C (122°F)
- Air Inlet
- Single element air filter
- Fuel
- Primary and secondary fuel shut-off
- Low fuel pressure switch
- Fuel pressure test po
- Natural Gas or LP Vapor
- NPT connection
- Dual lock off valves
- Exhaust
- Exhaust outlet with 3” pipe
- Generator
- Permanent magnet excitation
- Full load capacity alternator
- Class H insulation material
- Permanent magnet excitation
- Integrated Voltage Regulator
- Matched to the performance and output characteristics of Cat engines
- Class H insulation material
- Full load capacity alternator
- IP23 Protection
- Controls
- EMCP 4.2 Series generator set controller
- Mounting
- Vibration isolaton (puck type)
- Rubber vibration isolators
- Electric Power – Package Serial Number Prefix
- Battery charging alternator
- Electric Starting and/or Prelube
- Battery cables
- Solenoid activated starter motor
- Engine electrical system
- Solenoid activated starter motor
- Governor
- Electronic governor (non adjustable)
- Control Panel
- EMCP 4.2 Series generator set controller
- Starting/Charging
- Batteries with rack and cables
- 12 volt starting motor
Optional Equipment
- Starting/Charging
- Jacket water heater
- Battery heater
- Charging alternator
- Battery charger – UL Listed 10 amp
- General
- Enclosures: sound attenuated, weather protective
- Suitable for Use as Service Equipment (SUSE)
- Automatic transfer switches (ATS)
- UL 2200 package
- CSA Certification
- Generator
- Thermal magnetic or electronic trip MCCBs
- Anti-condensation heater
- Shunt trip and auxiliary contact breaker
- Anti-condensation heater
- Excitation: [ ] Permanent Magnet Excited (PM)
- Oversize and premium generators