Enquire about "DE110 GC Generator Set (60 Hz)" Now
DE110 GC Generator Set (60 Hz)
Cat Generator Set Package
- Cat generator set packages have been fully prototype tested
- Accepts 100% block load in one step and meets NFPA 110 loading requirements
- Conform to ISO 8528-5 steady state and transient response requirements
Cat Diesel Engine
- Reliable, rugged, durable design
- Field-proven in thousands of applications worldwide
- Four-stroke-cycle diesel engine combines consistent performance and excellent fuel economy with minimum weight
A-Frame Alternator
- Superior motor starting capability minimizes need for oversizing alternator
- Designed to match performance and output characteristics of Cat diesel engines
- Robust Class H insulation
GCCP 1.1 Control Panel
- User-friendly interface and navigation
- Scalable system to meet a wide range of installation requirement
- Expansion modules and site-specific programming for specific customer requirements
Cooling System
- Designed to operate in standard ambient temperatures up to 55°C (131°F)
- Contact your Cat Dealer for specific ambient and altitude capabilities
Certifications
- CE Certification Available
- CIS Certification Available
One Safe Source
- Components used in the generator set are selected based on seamless design integration to provide the optimum performance
- The generator set is fully assembled at a Caterpillar facility following our quality guidelines
- Each generator set package is tested before leaving the Caterpillar facility
- Cat product support, including dealer service, parts and warranty covers the entire Cat power system
Worldwide Product Support
- Cat dealers have over 1,800 dealer branch stores operating in 200 countries
- Your local Cat dealer provides extensive post-sale support, including maintenance and repair agreements
Generator Set Specifications | |
---|---|
Maximum Rating | 100 ekW |
Minimum Rating | 100 ekW |
Emissions/Fuel Strategy | Non Regulated |
Voltage | 220 to 480 Volts |
Frequency | 60 Hz |
Speed | 1800 rpm |
Duty Cycle | Standby |
Engine Specifications | |
---|---|
Engine Model | C4.4, In-line 4, 4-cycle diesel |
Bore | 105 mm (4.1 in) |
Stroke | 127 mm (5 in) |
Displacement | 4.4 l (268.5 in) |
Compression Ratio | 18.23:1 |
Aspiration | Turbocharged Air To Air Charge Cooled |
Fuel System | Inline |
Governor Type | Mechanical |
Generator Set Dimensions | |
---|---|
Length - Maximum | 2745 mm (108.1 in) |
Width - Maximum | 999 mm (39.3 in) |
Height - Maximum | 1476 mm (58.1 in) |
Dry Weight - Genset (maximum) | 1330 kg (2932 lb) |
Standard Equipment
- Engine
- C4.4, Inline 4 cylinder, 4 stroke diesel
- Alternator
- A Frame standard alternator
- Fuel Storage
- Single wall 8 hour fuel tank
- Genset Control
- GCCP 1.1
- Governor
- Mechanical governor
- Enclosure
- Cat GC enclosure
- Air, Cooling & Exhaust
- Enclosure silencer
- General
- Engine and alternator pre-paint, Caterpillar yellow
Optional Equipment
- Certification
- Australia, CIS, Gulf Certification
- Certificate of Conformance 13
- Auxiliary Supply Voltage
- 120V
- Alternator Requirements
- Space heater
- Fuel Storage
- Dual wall 8 hour fuel tank
- Low fuel level shutdown
- Single wall tank with containment
- Low fuel level alarm
- High fuel level alarm
- Genset Control
- Volt free contacts for genset running
- Emergency stop with key
- Battery charger
- Earth fault
- USB to RS485 Communications device
- Panel mounted audible alarm
- Earth leakage
- Volt free contacts for common alarm
- USB to RS485 Communications device
- Coolant heater
- Battery
- Low coolant level shutdown
- Standby Pack (Smart Jacket water heater, Battery charger)
- Circuit breaker
- 3 Pole Circuit breaker 125A
- 3 Pole Circuit breaker 160A
- 3 Pole Circuit breaker 200A
- 3 Pole Circuit breaker 250A
- 4 Pole Circuit breaker 160A
- 4 Pole Circuit breaker 125A
- 3 Pole Circuit breaker 400A
- 4 Pole Circuit breaker 200A
- 4 Pole Circuit breaker 250A
- Circuit breaker padlock
- 4 Pole Circuit breaker 400A
- Neutral earth link
- Overload via alarm switch on breaker
- Testing & Packaging
- PGS Test report @ 1.0 power factor
- PGS Test report @ 0.8PF