Enquire about "D450 GC (60 Hz) Generator Set" Now
D450 GC (60 Hz) Generator Set
Cat Generator Set Package
- Cat generator set packages have been fully prototype tested
- Accepts 100% block load in one step and meets NFPA 110 loading requirements
- Conform to ISO 8528-5 steady state and transient response requirements
Cat Diesel Engine
- Reliable, rugged, durable design
- Field-proven in thousands of applications worldwide
- Four-stroke-cycle diesel engine combines consistent performance and excellent fuel economy with minimum weight
M-Frame Alternator
- Superior motor starting capability minimizes need for oversizing alternator
- Designed to match performance and output characteristics of Cat diesel engines
- Robust Class H insulation
GCCP 1.2 Control Panel
- User-friendly interface and navigation
- Scalable system to meet a wide range of installation requirement
- Expansion modules and site-specific programming for specific customer requirements
Cooling System
- Designed to operate in standard ambient temperatures up to104°F (40°C)
- Contact your Cat Dealer for specific ambient and altitude capabilities
Certifications
- UL 2200 Listed
- ULC Certification Available
One Safe Source
- Components used in the generator set are selected based on seamless design integration to provide the optimum performance
- The generator set is fully assembled at a Caterpillar facility following our quality guidelines
- Each generator set package is tested before leaving the Caterpillar facility
- Cat product support, including dealer service, parts and warranty covers the entire Cat power system
World Wide Product Support
- Cat dealers have over 1,800 dealer branch stores operating in 200 countries
- Your local Cat dealer provides extensive post-sale support, including maintenance and repair agreements
| Generator Set Specifications | |
|---|---|
| Maximum Rating | 450 ekW |
| Minimum Rating | 450 ekW |
| Emissions/Fuel Strategy | EPA Stationary Emergency |
| Voltage | 480 to 600 Volts |
| Frequency | 60 Hz |
| Speed | 1800 RPM |
| Duty Cycle | Standby |
| Engine Specifications | |
|---|---|
| Engine Model | Cat® C15 In-line 6, 4-cycle diesel |
| Bore | 137 mm (5.4 in) |
| Stroke | 171 mm (6.8 in) |
| Displacement | 15.2 l (928 inu00b3) |
| Compression Ratio | 16.1:1 |
| Aspiration | Turbocharged Air-to-Air Aftercooled |
| Fuel System | MEUI |
| Governor Type | ADEM™A4 |
| Generator Set Dimensions | |
|---|---|
| Length - Maximum | 4815 mm (189.6 in) |
| Width - Maximum | 1630 mm (64.2 in) |
| Height - Minimum | 2034 mm (80.1 in) |
| Height - Maximum | 2584 mm (101.7 in) |
| Dry Weight - Genset (minimum) | 3707 kg (8172.5 lb) |
| Dry Weight - Genset (maximum) | 4644 kg (10238.3 lb) |
Standard Equipment
- Air Inlet System
- Aftercooler core
- Turbocharger
- Air cleaner – Non-Canister, Disposable
- Control Panel
- GCCP 1.2
- Cooling System
- Thermostats and housing.
- Blower fan and fan drive with guards
- Radiator, Package mounted.
- Coolant drain valve.
- Jacket water pump, gear driven, centrifugal
- Radiator sight gauge
- Exhaust System
- Exhaust manifold; dry
- Fuel System
- Fuel priming pump
- Integral Tank Base, 24 Hrs, UL142
- Primary fuel filter w/integral water separator and secondary filter, spin on
- Engine fuel transfer pump
- Fuel cooler
- Generator Set
- Complete system designed & built at ISO 9001:2000 certified facilities
- Factory tested to design specifications at full load conditions
- All protective devices and control functions simulated and checked
- Generators and Generator Attachments
- IP23 protection
- Voltage regulator (single phase sensing)
- Easy access to AVR and terminals
- Brushless, self-excited 2/3 pitch (600V uses Internal Excitation)
- Terminal Box, IP22 RHS Facing, Bottom Cable Entry
- Standard winding protection for non-harsh environments with relative humidity ? 95%
- 6 leads
- Insulation, Class H
- Governing System
- Cat Electronic Governor (ADEM A4)
- Lube System
- Fumes disposal to front of radiator.
- Oil filter, spin on.
- Lubricating Oil, CK-4 (10W-30)
- Shallow oil pan.
- Oil cooler
- Oil filler and dipstick.
- Oil drain with valve.
- Mounting System
- Includes lifting provisions and termination points for coolant and lube oil drain lines
- Captive linear vibration isolators between base and engine-generator
- Protection
- Safety Shutoff – Low Oil Pressure
- Safety Shutoff – Overspeed
- Safety Shutoff – High water temperature
- Starting/Charging System
- 24-volt electric starting motor.
- 24V,45 amp charging alternator.
- General
- Vibration damper.
- Parts Book
- Lifting Eyes
Optional Equipment
- Air Inlet System
- Air Cleaner (Non-Canister Disposable)
- Bases, Mounting & Fuel Tanks
- Overfill Prevention Valve
- Wide Base – Skid
- Audio & Visual Fuel Alarm (@90% Fuel Level)
- Integral Tank Base, 24 Hrs, UL142
- Fuel Tank Fill Pipe & Lockable Cap
- 5 gallon Spill Containment
- Exhaust
- Industrial, Residential, Critical Mufflers
- Circuit Breaker
- 400A LSI
- 400A LS/I
- 800A LSI
- Auxiliary Contacts
- 600A LS/I
- 1200A LSI
- 600A LSI
- 1200A LS/I
- 800A LS/I
- Control System
- Volt Free Contacts
- 100A Load Center
- Product Link Remote Monitoring hardware
- Twist Release, Red Button Emergency Stop
- 16 -light NFPA 99/110 Annunciator
- 20A GFCI (Ground Fault Circuit Interrupter)
- Audible Alarm Gp
- Ground Fault Relay
- Enclosures
- E-Stop
- AC & DC Source Lights
- Sound Attenuated Level 2 Enclosure (White)
- Generator
- Anti-condensation heater
- Oversize and premium generators
- Excitation: [ ] Permanent Magnet Excited (PM) [ ] Internally Excited (IE)
- Permanent Magnet Generator
- Space Heater
- Exhaust System
- Manifold & Turbocharger Guards
- Flexible Exhaust Connection
- 8″ Muffler – 25 dBA Attenuation
- Starting System
- Standard Battery Set: 1000 CCA, 90 amp/hr.
- Oversize Battery Set, 1400 CCA, 200 amp/hr.
- Battery Charger (UL Certified)
- Jacket Water Heater
- Power Termination
- Circuit breakers, IEC compliant
- Circuit breakers, UL listed
- General
- UL2200 Certification
- CSA Certification
- Extended Service Coverage
- Generator Test Report
- CSA Certification
- UL 2200 package
- Lube System
- Manual sump pump
- Mounting System
- Narrow skid base – replaces standard fuel tank base