Enquire about "Cat C32 Propulsion Engine (US EPA Tier 4 / IMO III)" Now
Cat C32 Propulsion Engine (US EPA Tier 4 / IMO III)
Air Inlet System
Separate-circuit aftercooling
- no sea water in aftercooler
Emissions
Utilizes SCR Technology to enable U.S. EPA Tier 4 Final emission regulations compliance while lowering operational costs, IMO III emissions compliant
Control Strategy
Utilizes closed loop air assisted DEF dosing control strategy that delivers: Highest efficiency mixing and control to lower operational costs, Extends emissions useful life, Ensures compliance, Flexible to urea quality
Fuel System
Enhanced control of fuel injection optimized through crank timing and the A5 ECM technology
Power Reserve
Industry leading power reserve
Certifications
Wide range of available Marine Society certifications
Warranty
Industry-leading warranty coverage for factory packaged components
Service
Global dealer network for service in any location
| Clean Emissions Module (CEM) - Dimensions | |
|---|---|
| 6 Brick Z-Flow - Length | 3751 mm (147.7 in) |
| Power Rating | |
|---|---|
| Power Range | 1000-1450 bhp (746-1081 bKW) |
| Dimensions & Weights | |
|---|---|
| Minimum Length | 2130 mm (83.9 in) |
| Clean Emissions Module (CEM) - Dimensions | |
|---|---|
| 6 Brick Z-Flow - Height | 597 mm (23.5 in) |
| Engine Specifications | |
|---|---|
| Speed Range | 1600-2150 rpm |
| Dimensions & Weights | |
|---|---|
| Maximum Length | 2280 mm (89.8 in) |
| Clean Emissions Module (CEM) - Dimensions | |
|---|---|
| 6 Brick Z-Flow - Width | 1106 mm (43.5 in) |
| Dimensions & Weights | |
|---|---|
| Minimum Height | 1507 mm (59.3 in) |
| Engine Specifications | |
|---|---|
| Emissions | U.S. EPA Tier 4 Final certifiednIMO III emissions certifiedn(SCR required) |
| Clean Emissions Module (CEM) - Dimensions | |
|---|---|
| 6 Brick Z-Flow - Weight | 565 kg (1246 lb) |
| Engine Specifications | |
|---|---|
| Configuration | Vee 12, 4-stroke-cycle diesel |
| Dimensions & Weights | |
|---|---|
| Maximum Height | 1613 mm (63.5 in) |
| Minimum Width | 1451 mm (57.1 in) |
| Clean Emissions Module (CEM) - Dimensions | |
|---|---|
| 6 Brick U-Flow - Length | 2159 mm (85 in) |
| Engine Specifications | |
|---|---|
| Bore | 145 mm (5.71 in) |
| Clean Emissions Module (CEM) - Dimensions | |
|---|---|
| 6 Brick U-Flow - Height | 597 mm (23.5 in) |
| Dimensions & Weights | |
|---|---|
| Maximum Width | 1455 mm (57.3 in) |
| Clean Emissions Module (CEM) - Dimensions | |
|---|---|
| 6 Brick U-Flow - Width | 1445 mm (56.9 in) |
| Dimensions & Weights | |
|---|---|
| Minimum Engine Dry Weight | 3152 kg (6950 lb) |
| Engine Specifications | |
|---|---|
| Stroke | 162 mm (6.38 in) |
| Displacement | 32.1 l (1959 inu00b3) |
| Dimensions & Weights | |
|---|---|
| Maximum Engine Dry Weight | 3248 kg (7160 lb) |
| Clean Emissions Module (CEM) - Dimensions | |
|---|---|
| 6 Brick U-Flow - Weight | 560 kg (1235 lb) |
| Dosing Cabinet - Length | 949 mm (37.4 in) |
| Engine Specifications | |
|---|---|
| Aspiration | Turbocharged-aftercooled aspiration |
| Clean Emissions Module (CEM) - Dimensions | |
|---|---|
| Dosing Cabinet - Height | 579 mm (22.8 in) |
| Engine Specifications | |
|---|---|
| Governor | Electronic (A5 ECM) |
| Refill Capacity | Lube Oil System w/ oil filter change: 146 L (38.5 gal) - deep pan |
| Clean Emissions Module (CEM) - Dimensions | |
|---|---|
| Dosing Cabinet - Width | 477 mm (18.8 in) |
| Dosing Cabinet - Weight | 95 kg (209 lb) |
| Engine Specifications | |
|---|---|
| Oil Change Interval | 1000 hrs - deep pan |
| Cooling | Heat exchanger or keel cooled |
| Flywheel Housing | SAE No. 0 with SAE No. 18 flywheel (136 teeth) |
| Rotation | Counterclockwise from flywheel end |
Standard Equipment
- FUEL SYSTEM
- Shipped loose primary fuel filter with water separator
- Duplex fuel filters with hybrid fuel lines
- Fuel transfer and priming pump
- AIR INLET SYSTEM
- Air cleaner
- Separate circuit aftercooled (SCAC)
- CONTROL SYSTEM
- 24V control system
- COOLING SYSTEM
- Heat exchanger or Keel Cooling
- Watercooled exhaust manifold and turbocharger
- Hard seawater lines – no flexible hoses
- Flanges for cooling connections, ANSI or DIN
- LUBE SYSTEM
- Oil fill, simplex filter and dipstick
- Deep or shallow sump oil pan
- MOUNTING SYSTEM
- Adjustable front support mounting system
- GENERAL
- Right or left hand service sides
- Customer wiring and service tool connector
Optional Equipment
- AIR INLET SYSTEM
- Closed crankcase fumes disposal
- ALARM AND PROTECTION
- MECP I control panel
- MECP III B control panel with Cat® Alarm and Protection System
- CHARGING SYSTEM
- Charging alternator
- FUEL SYSTEM
- Manual or electric fuel priming pump
- Fuel cooler
- LUBE SYSTEM
- Duplex oil filters
- POWER TAKE-OFFS
- Front drives including stub shaft and pump drive
- Rear SAE A or B pump drives
- STARTING SYSTEM
- Starting motors – air, electric or dual