Enquire about "Cat C32 Auxiliary/Generator Set Engine (EPA Tier 3)" Now
Cat C32 Auxiliary/Generator Set Engine (EPA Tier 3)
Emissions
U.S. EPA Tier 3 compliant
Worldwide Support
Extensive service network of dealers; Unparalleled service from authorized marine dealers
Durability
Proven engine operating history; Performance iron with thousands of hours of validation testing for quality and durability
Reliability
60 months standard warranty
Cooling System
Heat Exchanger or Keel Cooling; Heat exchanger configurations: optional front mounted sea water pump
Aftercooling System
Separate circuit aftercooling system (SCAC): no seawater circulating through the aftercooler
| Power Rating | |
|---|---|
| Minimum Rating | 781 bkW (1047 BHP) |
| Maximum Rating | 994 bkW (1333 BHP) |
| Engine Specifications | |
|---|---|
| Aspiration | TTA |
| Displacement | 32.1 l (1959 inu00b3) |
| Bore | 145 mm (5.7 in) |
| Stroke | 162 mm (6.4 in) |
| Rotation from Flywheel End | Counterclockwise |
| Configuration | Vee 12, 4-Stroke-Cycle Diesel |
| Dimensions & Weights | |
|---|---|
| Minimum Height | 1547 mm (60.9 in) |
| Maximum Height | 1587 mm (62.5 in) |
| Maximum Width | 1528 mm (60.2 in) |
| Maximum Dry Weight | 3248 kg (7160 lb) |
| Maximum Length | 2284 mm (89.9 in) |
| Minimum Dry Weight | 3152 kg (6950 lb) |
| Minimum Length | 2121 mm (83.5 in) |
| Minimum Width | 1528 mm (60.2 in) |
Standard Equipment
- AIR INLET SYSTEM
- Separate circuit after-cooled (SCAC)
- Air cleaner
- Turbocharger, jacket water cooled
- Turbocharger inlet, 152 mm (6 in) OD straight connection
- CONTROL SYSTEM
- Programmable Low Idle (550 – 750 rpm)
- Programmable High Idle Limit for WOSR Ratings
- Electronic diagnostics and fault logging
- Engine and transmission monitoring (speed, temperature, pressure)
- Electronic fuel/air ratio control
- Engine Protection Mode for extended ambient conditions
- 70-pin customer connector
- Throttle Input signal options
- 0 – 5 Volts
- 4 – 20 mA
- PWM (Pulse Width Modulated)
- COOLING SYSTEM
- Separate Circuit After-Cooling (SCAC) for both HEX and Keel cooled engines
- Jacket Water (JW) and SCAC Heat Exchangers Shell & Tube for HEX cooled engines
- SCAC pump, gear driven
- Jacket water pump, gear driven
- Sea water pump, bronze impeller, gear driven, when selected for Hex cooled engines
- Sea water Pump & JW Heat Exchanger Connection: 76.2 mm (3in) ID Standard 4 Bolt ANSI Flange Connection
- Keel Connections: 76.2 mm (3in) ID Standard 4 Bolt
- SCAC and JW shunt tanks for maintaining proper pump inlet pressures
- EXHAUST SYSTEM
- Water-cooled exhaust manifold & turbocharger
- 4 Bolt 130 mm (5.12 in) diameter flanged outlet
- FLYWHEELS & FLYWHEEL HOUSINGS
- SAE standard rotation (CCW facing exciter end)
- Flywheel Housing: SAE No. 0, Flywheel: 18 inch, 136 teeth
- FUEL SYSTEM
- Duplex Fuel Filters, Spin-on, RH & LH service
- Fuel connections size: r driven
- Plate-type fuel cooler installed behind Aftercooler Shunt Tank
- Fuel transfer pump, gear driven
- Manual fuel priming pump
- Hybrid fuel line design
- LUBE SYSTEM
- Simplex Oil Filters, RH or LH service
- Deep sump oil pan
- RH or LH service oil filler locations
- RH or LH service dipstick
- Oil pump, gear driven
- MOUNTING SYSTEM
- Front support – 33 inches wide
- POWER TAKE-OFFS
- Front Poly-V groove pulley (Quantity 1) for auxiliary drives
- GENERAL
- Common electrical bonding point
- Engine does not ship with zinc components
Optional Equipment
- EXHAUST SYSTEM
- Dry Elbows
- Flexible Fitting
- Flange
- Muffler
- Muffler Spark Arresting
- AIR INLET SYSTEM
- Air Inlet Adapter
- CHARGING SYSTEM
- Battery Chargers
- Charging Alternators
- Ammeter
- CONTROL SYSTEM
- Load Sharing Attachment
- Instrument Panels
- Caterpillar Alarm Protection
- Fuel and Oil Shielding
- FUEL SYSTEM
- Water Separator
- GENERAL
- FUMES DISPOSAL SYSTEM
- INSTRUMENTATION
- Instrument Panels
- OEM Wiring Harness
- Engine to Engine Harness
- Gauges
- Transmission Sensors
- Exhaust Temperature Sensors
- LUBE SYSTEM
- Duplex Oil Filters
- Sump Pump
- POWER TAKE-OFFS
- Rear Hydraulic Pump Drive
- STARTING SYSTEM
- Electric Starting Motors – Single 24 Volt
- Air Starting Motor
- Dual Starting Motors (Electric and Air)
- Air Start Accessories
- Starting Aids – JW Heaters
- Battery Sets – 24 Volt – Dry
- MOUNTING SYSTEM
- Front Support
- Rear Support
- Isolators Mounts
- Adapter Kits
- PACKING
- Engine Protective Cover
- Storage Preservation
- Export Packing