Cat C32 ACERT High Performance Marine Propulsion Engine (Tier 3 Rec)

CALCULATE FINANCE

Emissions

U.S. EPA Tier 3 compliant

Worldwide Support

Extensive service network of dealers; Unparalleled service from authorized marine dealers

Durability

Proven engine operating history; Performance iron with thousands of hours of validation testing for quality and durability

Reliability

60 months standard warranty

Cooling System

Heat Exchanger or Keel Cooling; Heat exchanger configurations: optional front mounted sea water pump

Aftercooling System

Separate circuit aftercooling system (SCAC): no seawater circulating through the aftercooler

Ratings
Power Range 1600-1900 bhp (1193-1417 bkW)
Engine
Speed Range 2300 rpm
Emissions EPA Tier 3, IMO II, EU IW
Aspiration TTA
Bore 145 mm (5.71 in)
Stroke 162 mm (6.38 in)
Displacement 32.1 l (1959 inu00b3)
Rotation from Flywheel End Counterclockwise
Configuration Vee 12, 4-Stroke-Cycle Diesel
Dimensions & Weights
Length 2106 mm (82.9 in)
Width 1482 mm (58.3 in)
Height 1445 mm (56.9 in)
Dry Weight 3075 kg (6780 lb)

Standard Equipment

  • AIR INLET SYSTEM
    • Air Cleaner System with washable filter elements and fumes disposal (closed system)
    • Turbocharger, jacket water cooled
    • Turbocharger inlet, 152 mm (6 in) OD straight connection
  • CONTROL SYSTEM
    • Programmable Low Idle (550 – 750 rpm)
    • Electronic diagnostics and fault logging
    • Engine and transmission monitoring (speed, temperature, pressure)
    • Electronic fuel/air ratio control
    • Engine Protection Mode for extended ambient conditions
    • 70-pin customer connector (Upper front-facing customer wiring connector and Service Tool connection)
    • Throttle Input signal options
  • COOLING SYSTEM
    • Sea Water Aftercooled Engine
    • Jacket water pump, gear driven
    • Sea water pump, rubber impeller, gear driven
    • Sea water Pump & JW Heat Exchanger Connection: 76.2 mm (3in) OD
    • Coolant recovery system
  • EXHAUST SYSTEM
    • Water-cooled exhaust manifold & turbocharger
    • 4 Bolt 130 mm (5.12 in) diameter flanged outlet
  • FLYWHEELS & FLYWHEEL HOUSINGS
    • Flywheel Housing:
  • FUEL SYSTEM
    • Simplex Fuel Filters Spin-on, RH & LH service
    • Fuel connections size:
    • Plate Type Fuel Cooler (Jacket Heat Exchanger)
    • Fuel transfer pump, gear driven
    • Manual fuel priming pump
    • Hybrid fuel line design
  • LUBE SYSTEM
    • Simplex Oil Filters, RH or LH service
    • RH or LH service oil filler locations
    • RH or LH service dipstick
    • Oil pump, gear driven
    • Shallow Sump
  • MOUNTING SYSTEM
    • Front support – adjustable
  • POWER TAKE-OFFS
    • Front Poly-V groove pulley (Quantity 1) for auxiliary drives
  • GENERAL
    • Lifting eyes
    • Front damper guard
    • RH or LH service options

Optional Equipment

  • EXHAUST SYSTEM
    • Muffler
    • Muffler Spark Arresting
  • CHARGING SYSTEM
    • Battery Chargers
    • Charging Alternators
    • Ammeter
  • FUEL SYSTEM
    • Water Separator
  • INSTRUMENTATION
    • Instrument Panels
    • OEM Wiring Harness
    • Engine to Engine Harness
    • Gauges
    • Transmission Sensors
    • Exhaust Temperature Sensors
  • LUBE SYSTEM
    • Transmission Oil Cooler
  • MOUNTING SYSTEM
    • Adapter Kits
    • Isolator Mounts
  • POWER TAKE-OFFS
    • Rear Hydraulic Pump Drive
  • PROTECTION SYSTEM
    • Fuel and Oil Shielding
  • STARTING SYSTEM
    • Electric Starting Motors – Single 24 Volt
    • Starting Aids – JW Heaters
    • Battery Sets – 24 Volt – Dry
  • CONTROL SYSTEM
    • Instrument Panels
  • PACKING
    • Engine Protective Cover
    • Storage Preservation
    • Export Packing

Enquiry Form

    REQUEST A CALL BACK
    This site is protected by reCAPTCHA and the Google Privacy Policy and Terms of Service apply.