Enquire about "Cat C32 ACERT Generator Set (EPA Tier 3)" Now
Cat C32 ACERT Generator Set (EPA Tier 3)
Emissions
U.S. EPA Tier 3 compliant
Worldwide Support
Extensive service network of dealers; Unparalleled service from authorized marine dealers
Durability
Proven engine operating history; Performance iron with thousands of hours of validation testing for quality and durability
Reliability
60 months standard warranty
Cooling System
Heat Exchanger or Keel Cooling; Heat exchanger configurations: optional front mounted sea water pump
Aftercooling System
Separate circuit aftercooling system (SCAC): no seawater circulating through the aftercooler
| Generator Set Specifications | |
|---|---|
| Minimum Rating | 730 ekW (913 kVA) |
| Maximum Rating | 940 ekW (1175 kVA) |
| Frequency | 60hz |
| Speed | 1800 rpm |
| Engine Specifications | |
|---|---|
| Aspiration | Turbocharged and aftercooled |
| Bore | 145 mm (5.7 in) |
| Stroke | 162 mm (6.38 in) |
| Displacement | 32.1 l (1959 inu00b3) |
| Governor Type | Electronic |
| Fuel System | MEUI |
| Engine Model | Vee-12, 4-stroke-Cycle-Diesel |
| Generator Set Specifications | |
|---|---|
| Emissions/Fuel Strategy | EPA Tier III |
| Generator Set Dimensions | |
|---|---|
| Width | 1528 mm (60.2 in) |
| Height | 1667 mm (65.6 in) |
| Weight - Estimated | 7131 kg (15721 lb) |
| Length | 162.8 in/4271 mm (minimum), 175.3 in/4452 mm (maximum) |
| Generator Specifications | |
|---|---|
| Excitation | Permanent magnet |
| Number of Poles | 4 |
| Number of Bearings | 2 roller bearings |
| Number of Leads | 6 |
| Insulation | Class H |
| IP Rating | 23 |
| Voltage Regulator | CDVR |
Standard Equipment
- AIR INLET SYSTEM
- Separate circuit after-cooled (SCAC)
- Turbocharger, jacket water cooled
- Turbocharger inlet, 152 mm (6 in) OD straight connection
- CONTROL SYSTEM
- If an EMCP panel or MGCP option is not chosen as optional equipment, then start/stop controls must be provided by the customer
- Electronic diagnostics and fault logging
- Engine Protection Mode for extended ambient conditions
- Electronic fuel/air ratio control
- COOLING SYSTEM
- Separate Circuit After-Cooling (SCAC) for Heat Exchanged (HEX) & Keel cooled engines
- Jacket Water (JW) and SCAC Heat Exchangers Shell & Tube for HEX cooled engines
- SCAC pump, gear driven
- Jacket water pump, gear driven
- Sea water pump, bronze impeller, gear driven, for HEX cooled engines only
- Jacket water HEX with Sea water pump Connections: 76.2 mm (3in) ID Standard
- 4 Bolt ANSI Flange Connection
- Jacket water HEX without Sea water pump Connection: 2.5″ hose barb connection (inlet), 76.2 mm (3in) ID Standard 4 Bolt ANSI Flange (outlet)
- Keel Connections: 76.2 mm (3in) ID Standard 4 Bolt ANSI Flange Connection
- SCAC and JW shunt tanks for maintaining proper Pump inlet pressures
- EXHAUST SYSTEM
- Water-cooled exhaust manifold & turbocharger
- 4 Bolt 130 mm (5.12 in) diameter flanged outlet
- FLYWHEELS & FLYWHEEL HOUSINGS
- Flywheel Housing, SAE No. 0
- Flywheel, 18 inch, 136 teeth
- SAE standard rotation
- FUEL SYSTEM
- Duplex Fuel Filters, Spin-on, RH service
- Fuel connections size: Supply JIC 37 Deg -10 (7/8-14), Return JIC 37 Deg -8 (3/4-16)
- Plate-type fuel cooler installed behind Aftercooler Shunt Tank
- Fuel transfer pump, gear driven
- Manual fuel priming pump
- GENERATORS AND GENERATOR ATTACHMENTS
- SR5 form wound
- 2 roller bearings
- Permanent magnet excitation
- 4 pole, 6 leads, Series Star connected
- Caterpillar’s Digital Voltage Regulator (CDVR)
- Marine Class H insulation, Class F temperature rise
- Surface mounted platinum (PT100) 3-wire RTDs, 2 per phase on stator and one each on support bearings
- Anti-condensation space heaters (2 elements – 240 VAC, 1000 Watts
- IP23 Protection suitable for use with Fixed Water Based Local Application Fire Fighting Systems (FWBLAFFS)
- System IV insulation for harsh environment protection
- LUBE SYSTEM
- Simplex oil filters, RH service
- Deep sump oil pan
- RH service oil filler locations
- RH service dipstick
- Oil pump, gear driven
- MOUNTING SYSTEM
- Formed C-channel rails, 300mm (11.81in) height
- Six shipped loose combined helical spring/rubber
- isolators for installation below package base
- GENERAL
- Front Damper guard
- Common electrical bondng point on HEX and KEEL cooled engines
Optional Equipment
- ALARM AND PROTECTION
- Remote panels
- MCS Controller
- Power analyzer module
- Oil level, exhaust temperature, air starting pressure, heat exchanger pressure sensors
- EXHAUST SYSTEM
- Dry Elbows
- Flexible Fitting
- Flange
- Muffler
- Muffler Spark Arresting
- Rain Cap
- AIR INLET SYSTEM
- Air Inlet Cleaner
- Closed Crankcase Ventilation
- Air inlet adapter
- CHARGING SYSTEM
- Battery Chargers, Charging Alternators
- CONTROL SYSTEM
- Load Sharing Attachment
- FUEL SYSTEM
- Water Separator
- LUBE SYSTEM
- Duplex Oil Filters, Sump Pump
- PROTECTION SYSTEM
- Fuel and Oil Shielding
- STARTING SYSTEM
- Electric Starting Motors – Single 24 Volt
- Air Starting Motor
- Dual Starting Motors (Electric and Air)
- Air Start Accessories
- Starting Aids – JW Heaters
- Battery Sets – 24 Volt – Dry