Enquire about "Cat C2.2 Marine Generator Set" Now
Cat C2.2 Marine Generator Set
| Generator Set Specifications | |
|---|---|
| Minimum Rating | 16 ekW (16kVA) |
| Maximum Rating | 27 ekW (27 kVA) |
| Frequency | 50 Hz or 60 Hz |
| Speed | 1500 rpm (50Hz) or 1800 rpm (60 Hz |
| Engine Specifications | |
|---|---|
| Engine Model | C2.2, In-line 4, 4-Stroke-Cycle Diesel |
| Aspiration | Naturally Aspirated |
| Bore | 84 mm (3.31 in) |
| Stroke | 100 mm (3.94 in) |
| Displacement | 2.2 l (135 inu00b3) |
| Governor Type | Electrical Ischronous |
| Fuel System | Fuel filter u2014 RH or LH service, fuel priming, fuel transfer pump, flexible fuel lines |
| Generator Set Specifications | |
|---|---|
| Emissions/Fuel Strategy | EPA Tier 3, IMO NST, EU IW |
| Generator Specifications | |
|---|---|
| Excitation | AREP |
| Pitch | 2/3 pitch |
| Number of Poles | 4 |
| Number of Leads | 4 |
| Insulation | Class H |
| Voltage Regulation | u00b10.5% |
| Frame Size | 2.2 |
| IP Rating | 23 |
| Wave Form Deviation - Line to Line | <2% |
| Voltage Regulator | Steady State |
| Dimensions & Weights | |
|---|---|
| Minimum Approximate Weight | 389 kg (857 lb) |
| Height - Enclosed Set | 775 mm (31 in) |
| Height - Open Set | 825 mm (32 in) |
| Width - Open Set | 521 mm (20.5 in) |
| Maximum Approximate Weight | 466 kg (1027 lb) |
| Length - Open Set | 1147 mm (45 in) |
| Width - Enclosed Set | 608 mm (24 in) |
| Length - Enclosed Set | 1170 mm (46 in) |
Standard Equipment
- Air Inlet System
- Air cleaner, single element canister type with rain cap (open generator set only)
- Cooling System
- Belt-driven centrifugal jacket water pump, gear-driven seawater pump, heat exchanger with copper nickel tubes, expansion tank
- Control System
- Electronic isochronous governor
- Exhaust System
- Watercooled exhaust manifold and elbow
- Fuel System
- Fuel filter — RH or LH service, fuel priming, fuel transfer pump, flexible fuel lines
- Generator
- Single-phase — brushless, shunt excited, 4-pole, 4-lead reconnectable with class H insulation, automatic voltage regulation ±0.5%, 2/3 pitch, IP23 water protection, solid state voltage regulator with integral voltage adjustment potentiometer, connection poles;
- Lube System
- Lubricating oil, oil filter (RH), dipstick (RH), fumes disposal (closed system)
- Mounting System
- Anti-vibration mounts, connected to drip tray and steel base sitting on PVC foam sound-absorbent pad
- Protection System
- Electronic automatic safety shutdown for low oil pressure, high water temperature, high exhaust (wet exhaust only) temperature, and overspeed
- Starting System
- 12 or 24 volt electronic starting motor, 12 volt 55 amp alternator
- General
- Single-side service (RH), decals, literature