Enquire about "C280-8 Generator Set (Medium Speed)" Now
C280-8 Generator Set (Medium Speed)
Cat Diesel Engine
Generator
Worldwide Product Support
Full Range of Attachments
| Generator Set Specifications | |
|---|---|
| Maximum Rating | 2420 ekW (60Hz), 3250 kVA (50Hz) |
| Minimum Rating | 2200 ekW (60Hz), 2938 kVA (50Hz) |
| Emissions/Fuel Strategy | EPA Tier 4 Final, IMO Tier 2 |
| Frequency | 50 / 60 Hz |
| Speed | 900 / 1000 rpm |
| Duty Cycle | Prime, Continuous |
| Engine Specifications | |
|---|---|
| Engine Model | C280-8, I-8,4-Stroke Water-Cooled Diesel |
| Bore | 280 mm (11 in) |
| Stroke | 300 mm (11.8 in) |
| Displacement | 148 l (9064 inu00b3) |
| Compression Ratio | 13:01 |
| Aspiration | TA |
| Fuel System | Direct unit injection |
| Governor Type | Generator Set Monitoring System (GMS) |
| Generator Set Dimensions | |
|---|---|
| Length - Maximum | 10261.7 mm (404 in) |
| Width - Maximum | 2530.3 mm (99.62 in) |
| Height - Maximum | 3977.7 mm (156.6 in) |
| Dry Weight - Genset (maximum) | 41390 kg (91050 lb) |
Standard Equipment
- Air Inlet System
- Aftercooler, fresh water, corrosion resistant coated (air side)
- Breather, crankcase, top-mounted
- Turbocharger, watercooled (720 rpm and HFO), engine oil lubricated
- Air inlet shutoff
- Cooling System
- Engine coolant water drains
- Jacket water thermostats
- Water temperature regulator
- Exhaust System
- Includes adapter, flexible exhaust fitting
- 457 mm (18 in) Cat bolt pattern
- Dry, gas tight, exhaust manifold
- Fuel System
- Simplex or duplex
- Generator System
- Custom generator per generator data sheet completed by dealer
- Governor System
- UG Actuator
- Lube System
- Oil filler and dipstick
- Crankcase explosion relief valves
- Oil pressure regulating valve
- Service side engine mounted on cylinder block inspection covers
- Wet oil sump. Includes engine-driven main lubrication and oil pumps, oil lines and oil pan
- Centrifugal oil filters with single shutoff
- Mounting System
- Engine and generator mounting
- Damper, torsional vibration
- Starting / Charging System
- Air silencer
- Vane type air starter
- One motor, engine mounted at rear, on left side
- Line group for single point custom connection
- General:
- Paint, Caterpillar yellow
- Gear driven pumps: Fuel/oil/jacket water/Aftercooler/Oil cooler water
Optional Equipment
- Air Inlet System
- Air cleaner louver assembly
- Boost control valve
- Soot filter
- Vertical support bracket
- Heavy duty air cleaner
- Air inlet adapter
- Cooling System
- Heating aids
- Auxiliary water pump
- Cooling system aids
- Expansion tank
- Exhaust System
- Weld flange and related hardware
- Flexible exhaust fittings
- Fuel System
- Fuel priming pump
- Fuel system connections
- Duplex primary fuel strainer
- Generator System
- 3 Phase, six Leads, WYE
- Class F insulation
- Busbar connections
- Winding temperature detectors
- Anti-condensation space heaters
- Governor System
- Battery backup/power supply
- EGB actuator
- 2301 A load share
- Electronic/actuators
- Digital programmers
- 723 Plus
- Lube System
- Oil pan drain valve
- Lube ANSI adapter (Emergency connection)
- Mounting System
- Spring type vibration isolators
- Isolator
- Vertically restrained
- Non-vertically restrained
- Starting / Charging System
- Pressure reducing valve
- Compressed air flex hose
- General:
- Custom paint colors