Enquire about "C18 Generator Set" Now
C18 Generator Set
Cat Generator Set Package
Cat Diesel Engine
SR5 Alternator
GCCP 1.2 Control Panel
Cooling System
Certifications
One Safe Source
World Wide Product Support
Generator Set Specifications | |
---|---|
Maximum Rating | 750 ekW |
Minimum Rating | 500 ekW |
Emissions/Fuel Strategy | U.S. EPA Certified |
Voltage | 208 to 600 Volts |
Frequency | 60 Hz |
Speed | 1800 rpm |
Duty Cycle | Standby, Prime |
Engine Specifications | |
---|---|
Engine Model | Cat® C18 ATAACTM In-line 6, 4-cycle diesel |
Bore | 145 mm (5.71 in) |
Stroke | 183 mm (7.2 in) |
Displacement | 18.1 l (1106.3 inu00b3) |
Compression Ratio | 14:01 |
Aspiration | Turbocharged Air to Air Aftercooled |
Fuel System | Electronic unit injection |
Governor Type | Electronic ADEM A4 |
Generator Set Dimensions | |
---|---|
Length - Maximum | 3512 mm (138 in) |
Width - Maximum | 1690 mm (67 in) |
Height - Maximum | 2222 mm (88 in) |
Standard Equipment
- Air Inlet System
- Aftercooler core
- Turbocharger
- Control System
- 3 Pole
- GCCP 1.2
- Right mounted power centre
- Standard breaker
- Cooling System
- Jacket water pump, gear driven
- Thermostats and housing
- Coolant level sight gauge
- Coolant level sensor
- Coolant drain valve; terminated on edge of base
- Cooling system filled with Caterpillar Extended Life Coolant
- Radiator and cooling fan with belt guards
- Exhaust System
- Exhaust manifold; dry
- Fuel System
- Primary fuel filter w/integral water separator & secondary filter
- Flexible fuel lines
- Fuel cooler
- Engine fuel transfer pump
- Fuel priming pump
- Generator and Attachments
- Brushless, self-excited 2/3 pitch, random wound
- Insulation Class H and temperature rise
- Power centre, IP22 bottom cable entry
- Segregated low voltage wiring panel
- IP23 Protection
- Mounting System
- Anti-vibration mounts (Non-captive)
- Generator mounting & Duct Plate
- Narrow skid base
- Protection System
- Overspeed
- Low oil pressure shutdown
- High coolant temperature shutdown
- Low Coolant level shutdown
- Starting/Charging
- 24 Volt electric starting motor
Optional Equipment
- Air Inlet System
- Dual element air cleaner
- Heavy duty canister air filters
- Control System
- Annunciators box
- Volt free contact
- Remote E-Stop button
- Discrete I/O module
- Earth (Ground) fault relay
- Local annunciator
- GCCP 1.5
- Circuit Breakers
- Auxiliary contacts
- Neutral bar (208V)
- Single LSI motorised circuit breaker
- Single LSI motorised Circuit Breaker
- External paralleling
- Enclosures
- Sound attenuated (SA)
- Weather protective
- Aluminium enclosure
- Cooling System
- Stone guards
- Coolant heater
- Jacket water heater with pump
- Base / Fuel Tank
- Audio & visual fuel alarm
- Sub Base Dual Wall Fuel Tank: 660, 1000, 1900, 2200 gal
- Fuel System
- Sub tank bases: 24 hr & 48 hr
- Integral 8 hr tank base
- Generator and Attachments
- LC frame oversize generators
- Space heater control
- PMG, AREP
- Oversize
- Coastal protection (CIP)
- Starting and Charging
- Battery disconnect switch
- 5 Amp battery charger
- Oversize battery set
- Standard battery set
- Certifications
- Certification of Compliance � IBC
- CSA 22.2
- Dual IBC & OSHPD
- UL2200 Listed
- Seismic
- General
- Tool set
- Lube System
- Manual sump pump