Enquire about "C13 Generator Set" Now
C13 Generator Set
Cat Generator Set Package
- Cat generator set packages have been fully prototype tested
- Accepts 100% block load in one step and meets NFPA 110 loading requirements
- Conform to ISO 8528-5 steady state and transient response requirements
Cat Diesel Engine
- Reliable, rugged, durable design
- Field-proven in thousands of applications worldwide
- Four-stroke-cycle diesel engine combines consistent performance and excellent fuel economy with minimum weight
A-Frame Alternator
- Superior motor starting capability minimizes need for oversizing alternator
- Designed to match performance and output characteristics of Cat diesel engines
- Robust Class H insulation
EMCP Control Panel
- User-friendly interface and navigation
- Scalable system to meet a wide range of installation requirement
- Expansion modules and site-specific programming for specific customer requirements
Cooling System
- Designed to operate in standard ambient temperatures up to 55°C (131°F)
- Contact your Cat Dealer for specific ambient and altitude capabilities
Certifications
One Safe Source
- Components used in the generator set are selected based on seamless design integration to provide the optimum performance
- The generator set is fully assembled at a Caterpillar facility following our quality guidelines
- Each generator set package is tested before leaving the Caterpillar facility
- Cat product support, including dealer service, parts and warranty covers the entire Cat power system
World Wide Product Support
- Cat dealers have over 1,800 dealer branch stores operating in 200 countries
- Your local Cat dealer provides extensive post-sale support, including maintenance and repair agreements
| Generator Set Specifications | |
|---|---|
| Minimum Rating | 320 ekW |
| Maximum Rating | 400 ekW |
| Emissions/Fuel Strategy | EPA Stationary Emerg Use |
| Voltage | 208 to 600 Volts |
| Frequency | 60 Hz |
| Speed | 1800 rpm |
| Duty Cycle | Standby, Prime |
| Engine Specifications | |
|---|---|
| Engine Model | C13 ACERT In-line 6, 4-cycle diesel |
| Bore | 130 mm (5.12 in) |
| Stroke | 157 mm (6.2 in) |
| Displacement | 12.5 B (763 inu00b3) |
| Compression Ratio | 16.3:1 |
| Aspiration | Turbocharged Air to Air Aftercooled |
| Fuel System | MEUI |
| Governor Type | Adem™A4 |
| Generator Set Dimensions | |
|---|---|
| Length - Maximum | 4743 mm (186.7 in) |
| Width - Maximum | 2014 mm (79.3 in) |
| Height - Maximum | 2133 mm (84 in) |
Standard Equipment
- Air Inlet System
- Turbocharger
- Aftercooler core
- Air cleaner; light duty with disposable paper filter
- Starting / Charging
- Charging alternator
- 24-Volt electric starting motor
- Control Panel
- EMCP 4.2
- Control System Controller
- EMCP 4.2
- Cooling System
- Fan drive, battery charging alternator drive
- Caterpillar Extended Life Coolant
- Coolant drain line with valve
- Radiator and cooling fan with guard
- Certification
- EPA stationary emergency use
- Exhaust System
- Stainless steel exhaust flex, gaskets, raincap & SAE exhaust flange for customer use; shipped loose
- Base / Fuel Tank
- Audio and visual fuel alarm
- Fuel System
- Standard open set fuel tank / base supplied
- Base, formed steel with single wall integral 8-hour fuel tank
- Protection
- Safety Shutoff – Overspeed
- Safety Shutoff – Low Oil Pressure
- Safety Shutoff – High water temperature
- Generator and Attachments
- Segregated low voltage (AC/DC) wiring panel
- Power center, IP22
- A frame generator – IP21 Protection
- Integrated Voltage Regulator
- Optional LC frame generator – IP23 Protection
- Mandatory Option circuit breaker, IEC, 3 pole, mounted in power centre
- Governing System
- Cat Electronic Governor (ADEM A4)
- Lube System
- Oil Cooler
- Oil drain valves
- Lubricating oil
- Mounting System
- Includes lifting provisions and termination points for coolant and lube oil drain lines
- Captive linear vibration isolators between base and engine-generator
- Starting / Charging System
- 24V battery with rack and cables
- General
- Engine and alternator pre-paint, Caterpillar yellow
Optional Equipment
- European Certificates
- Global certificate for CIS
- EU certificate of conformance
- Air Inlet System
- Single element air cleaner
- Dual element air cleaner
- Circuit Breakers
- Pad-lockable circuit breaker device
- 3 Pole (IEC-100% rated) circuit breaker
- Shunt trip for IEC circuit breaker
- 4 Pole (IEC-100% rated) circuit breaker – Motorised
- Circuit breaker (IEC) auxiliary contacts
- 4 Pole (IEC-100% rated) circuit breaker
- Power terminal strip
- 3 Pole (IEC-100% rated) circuit breaker – Motorised
- Control Panels
- Control panel protective devices: Earth fault relay ; Earth leakage ground fault ; Overload shutdown via breaker ; low fuel level alarm ; Low fuel level shutdown ; High fuel level alarm ; Fuel level sensor
- EMCP 4.3, EMCP 4.4
- Volt free contacts
- Local alarm modules: Local annunciator
- Remote annunciator modules
- Cooling System
- Radiator duct flange
- Stone guards
- Low coolant temperature alarm
- Enclosures
- Sound attenuated enclosures
- High ambient sound attenuated enclosures
- Exhaust System
- Flexible 8 inch exhaust fittings
- Mufflers – End in / End out
- 10, 25 and 35 dBA attenuation
- 6 and 8 inch elbow kit
- 6 and 8 inch flange GP
- Fuel System
- Fuel transfer system controls
- Manual fuel transfer pump
- Integral dual wall fuel tank base
- Generator and Attachments
- LC frame generator
- LC CIP generator
- Space heaters
- Ingress protection
- A frame oversize generator
- Permanent magnet generator
- A frame CIP generator
- Lube System
- Manual sump pump
- Mounting System
- Narrow skid base
- starting / Charging System
- Battery disconnect switch
- Jacket water heater
- 5 Amp single battery charger