Enquire about "C1.1 Generator Set" Now
C1.1 Generator Set
Cat Generator Set Package
- Cat generator set packages have been fully prototype tested
- Accepts 100% block load in one step and meetsNFPA 110 loading requirements
- Conform to ISO 8528-5 steady state and transient response requirements
Cat Diesel Engine
- Reliable, rugged, durable design
- Field-proven in thousands of applications worldwide
- Four-stroke-cycle diesel engine combines consistent performance and excellent fuel economy with minimum weight
M-Frame Alternator
- Superior motor starting capability minimizes need for oversizing alternator
- Designed to match performance and output characteristics of Cat diesel engines
- Robust Class H insulation
GCCP 1.3 Control Panel
- User-friendly interface and navigation
- Scalable system to meet a wide range of installation requirement
- Expansion modules and site-specific programming for specific customer requirements
- Image may not be a representative of actual product
Cooling System
- Designed to operate in standard ambient temperatures up to 55°C (131°F)
- Contact your Cat Dealer for specific ambient and altitude capabilities
Certifications
Cat Dealers provide extensive post sale support including maintenance and repair agreements. Cat dealers have over 1,800 dealer branch stores operating in 200 countries. The Cat® SOSSM program cost effectively detects internal engine component condition, even the presence of unwanted fluids and combustion by-products.
One Safe Source
- Components used in the generator set are selected based on seamless design integration to provide the optimum performance
- The generator set is fully assembled at a Caterpillar facility following our quality guidelines
- Each generator set package is tested before leaving the Caterpillar facility
- Cat product support, including dealer service, parts and warranty covers the entire Cat power system
World Wide Product Support
- Cat dealers have over 1,800 dealer branch stores operating in 200 countries
- Your local Cat dealer provides extensive post-sale support, including maintenance and repair agreements
Generator Set Specifications | |
---|---|
Maximum Rating | 9.5 kVA |
Minimum Rating | 6.8 kVA |
Emissions/Fuel Strategy | R96/EUIIIa Equivalent |
Voltage | 110 to 415 Volts |
Frequency | 50 Hz |
Speed | 1500 rpm |
Duty Cycle | Standby, Prime |
Engine Specifications | |
---|---|
Engine Model | C1.1, In-line 4 4-cycle diesel |
Bore | 77 mm (3 in) |
Stroke | 81 mm (3.2 in) |
Displacement | 1.1 l (69 inu00b3) |
Compression Ratio | 23.0:1 |
Aspiration | Naturally Aspirated |
Fuel System | Indirect Injection |
Governor Type | Mechanical |
Generator Set Dimensions | |
---|---|
Length - Maximum | 1400 mm (55.1 in) |
Width - Maximum | 620 mm (24.4 in) |
Height - Maximum | 996 mm (39.2 in) |
Standard Equipment
- Air Inlet System
- Air cleaner; light duty with disposable element
- Control Panel
- GCCP1.3 Control panel
- Cooling System
- Caterpillar extended life coolant
- Coolant drain line with valve
- Fan drive, battery charging alternator drive
- Radiator and cooling fan with guards
- Exhaust System
- Stub pipe, gaskets, raincap & SAE exhaust flange for customer use – shipped loose
- Fuel System
- Base, formed steel with single wall integral 8-hour fuel tank
- Standard open set fuel tank/base supplied
- General
- Engine and alternator pre-paint, Caterpillar yellow
- Generators and Generator Attachments
- 12 Leads
- Circuit breaker, IEC, 3 pole, mounted in tower panel
- IP23 Protection
- Segregated low voltage (AC/DC) wiring panel
- Tower panel, IP22, bottom cable entry
- Voltage regulator (single phase sensing)
- Governing System
- Mechanical governing system
- Lube System
- Lubricating oil
- Oil drain line with valve
- Mounting System
- Anti-vibration mounts
- Captive linear vibration isolators between base and engine-generator
- Includes lifting provisions and termination points for coolant
- Skidbase as standard
- Starting / Charging System
- 12 Volt battery with rack and cables
Optional Equipment
- Alternator Options
- Coastal insulation protection
- Certificates
- European upgrade to STD set for CE certificate
- Global certification for CIS
- Circuit breakers
- 4 Pole Circuit breaker
- Padlockable breaker device
- Control Panel
- Battery charger
- Emergency stop with key
- Cooling System
- Coolant heater
- Enclosures
- Single point lift for enclosure
- Sound attenuated enclosure (GALV)
- Fuel System
- Low fuel level alarm
- General
- Packing case – canopied set
- Packing case – compact set
- Radiator stone guard
- Mounting Options
- Battery removal
- Industrial silencer removal
- Silencer installation kit
- Special Test and Inspection
- PGS Test report @ 1.0 power factor