360°Exterior View
360°Interior View

926M Aggregate Handler Small Wheel Loader

  • Overview
  • Finance With CavPower
  • Optional Services
  • View product Download
CALCULATE FINANCE

Application Specific Configuration

INCREASED PAYLOAD
Additional counterweight improves stability without reducing ground clearance or departure angle to maximize performance.

LONG LIFE SAND AND GRAVEL BUCKETS
Performance Series Buckets deliver higher fill factors and better material retention for significant productivity and fuel efficiency improvements. The buckets feature a long floor, open throat, curved side bars and additional serviceable wear plates including corner guards.

PROTECT YOUR POWER TRAIN
Increase your fording depths with optional elevated breathers. Remote mounted high on the machine for the front and rear axles and hydrostatic gear box. Allows settling pond clean out without contamination.

Efficiently Powerful

The Cat® C7.1 engine provides cleaner, quieter operation while delivering superior performance and durability through a high torque, low speed design. Caterpillar’s exclusive Intelligent Power Management system monitors operator input and power availability to keep the machine working at peak efficiency and provide the operator with greater customization to suit their application.

A choice of Power Modes allows you to choose between maximum fuel efficiency or boosted power along with hydraulic speed.

STANDARD POWER MODE

  • Saves fuel and reduces cab sound levels
  • Biggest gains are seen during load and carry, snow removal and roading applications

PERFORMANCE POWER MODE

  • Enabled at the push of a button (HP+), boosts engine power by up to 10% and engine speed by over 12%
  • Increases hydraulic cycle times and productivity

Lock up and go with fully locking front differential axle that can be engaged on the move at full torque. Maximize your traction with optional Limited Slip Differential on the rear axle to keep you climbing.

Enjoy All Day Comfort

A spacious, quiet and comfortable operator environment helps keep you relaxed and productive throughout the day. Experience superior all around visibility with single piece front windshield, redesigned linkage and clean hydraulic lines routing. Seat-mounted controls featuring low effort joystick for lift and tilt functions along with integrated Forward/Neutral/Reverse switch, differential lock trigger and optional third and fourth auxiliary functions.

  • Automatic climate control with heated rear glass and external mirrors
  • Information at a glance with large primary LCD display
  • Heated and cooled seat option
  • Optional Ride Control
  • Exclusive electro-hydraulic cylinder snubbing
  • An extra eye on the job site with optional integrated rear object detection and optional* rearview camera

*Standard in Europe.

Customize Your Experience

The M Series Aggregate Handler will remember you and your personal settings with unique operator codes to make this machine truly yours and keep it secure.

Work as one with your machine by customizing your controls.

  • Select your Power Train Mode
  • Reduce tire wear using Rimpull
  • Fine tune ground speed with Creeper Control
  • Adjustable Electo-Hydraulic Controls
  • Set Directional Shift Response based on job application

Service

Get up and running quickly with ground level, daily service access and optional engine compartment lighting. Three large service doors can be opened and closed in any order to give full access to filters and service points. Extended service intervals on hydraulic and power train filters reduce service time and maximize uptime. Additional service features include:

  • Product Link™ PRO standard with optional subscription to VisionLink®.
  • Maintenance reminders through secondary display at scheduled intervals.
  • Fit for Life Diesel Particulate Filter that is designed to exceed the engine overhaul life.
  • Quick fuel filter service with Caterpillar’s exclusive electric fuel priming pump.
  • Jump start studs as standard equipment.
  • Extended cleanouts with single plane cooling system and wide spaced 6 fans per inch coolers as standard.
  • Integrated Autolube (optional) with adjustable greasing frequency.

Customer Support

With renowned Cat dealer support, rely on your Cat dealer to help you every step of the way with new or used machine sales, rental or rebuild options to meet your business needs.

Maximize your machine uptime with unsurpassed worldwide parts availability, trained technicians and customer support agreements.

Let us earn your business. Experience an M Series Small Wheel Loader and join the Caterpillar family.

Engine
Maximum Gross Power 125 kW (168 HP)
Bore 105 mm (4 in)
Stroke 135 mm (5 in)
Displacement 7.01 l (427 inu00b3)
Emissions The Cat C7.1 engine meets U.S. EPA Tier 4 Final, EU Stage V and Korea Tier 4 Final emission standards.
Maximum Rated Gross Power - ISO 14396 125 kW (168 HP)
Maximum Gross Torque - ISO 14396 (Standard Power Mode: Range 1-3*) 795 N·m (586 ft·lbf)
Note (2) Net power ratings are tested at the reference conditions for the specified standard and denote power available at the flywheel when the engine is equipped with alternator, air cleaner, emission components and fan at specified speed.
Maximum Gross Power - Maximum Engine Speed (Performance Power Mode: Range 1-4) 1800 r/min (1800 r/min)
Maximum Gross Power - ISO 14396 (Performance Power Mode: Range 1-4) 125 kW (168 HP)
Maximum Net Torque - SAE J1349 (Standard Power Mode: Range 1-3*) 777 N·m (573 ft·lbf)
Note (3) No derating required up to 3000 m (10,000 ft) altitude. Auto derate protects hydraulic and transmission systems.
Maximum Gross Power - ISO 14396 (Standard Power Mode: Range 1-3*) 119 kW (160 HP)
Maximum Gross Power - Maximum Engine Speed (Standard Power Mode: Range 1-3*) 1600 r/min (1600 r/min)
Engine Model Cat® C7.1
Maximum Gross Torque - ISO 14396 (Performance Power Mode: Range 1-4) 815 N·m (601 ft·lbf)
Maximum Net Torque - SAE J1349 (Performance Power Mode: Range 1-4) 797 N·m (588 ft·lbf)
Note (1) *Range 4 power and torque is equal to Performance Mode with Caterpillar Power by Range technology.
Maximum Gross Power - ISO 14396 (metric) (Performance Power Mode: Range 1-4) 125 kW (170 HP)
Net Power - ISO 9249 (metric) at Minimum Fan Speed (Performance Power Mode: Range 1-4) 122 kW (166 HP)
Net Power - ISO 9249 at Minimum Fan Speed (Performance Power Mode: Range 1-4) 122 kW (164 HP)
Net Power - SAE J1349 at Minimum Fan Speed (Performance Power Mode: Range 1-4) 122 kW (163 HP)
Maximum Net Torque - ISO 9249 (Performance Power Mode: Range 1-4) 796 N·m (587 ft·lbf)
Maximum Gross Power - ISO 14396 (metric) (Standard Power Mode: Range 1-3*) 119 kW (162 HP)
Maximum Rated Gross Power - ISO 14396 (metric) 125 kW (170 HP)
Net Power - ISO 9249 at Minimum Fan Speed (Standard Power Mode: Range 1-3*) 116 kW (156 HP)
Net Power (Standard Power Mode: Range 1-3*) 1600 r/min (1600 r/min)
Net Power (Performance Power Mode: Range 1-4) 1800 r/min (1800 r/min)
Net Power - SAE J1349 at Minimum Fan Speed (Standard Power Mode: Range 1-3*) 116 kW (156 HP)
Maximum Net Torque - ISO 9249 (Standard Power Mode: Range 1-3*) 776 N·m (572 ft·lbf)
Net Power - ISO 9249 (metric) at Minimum Fan Speed (Standard Power Mode: Range 1-3*) 116 kW (158 HP)
Buckets
Bucket Capacities 2.5-5.0 mu00b3 (3.3-6.5 ydu00b3)
Weights
Operating Weight 12963 kg (28577 lb)
Note (2) ~Aggregate Handler equipped with full counterweight, optional guards, roading fenders, and cold start package.
Operating Weight (2) 12 963 kg (28,577 lb)~
Operating Weight (1) 12 891 kg (28,418 lb)**
Note (1) **Aggregate Handler machine equipped with full counterweight and optional guards.
Cab
ROPS ISO 3471:2008
Service Refill Capacities
Diesel Exhaust Fluid (DEF) Tank 19 l (5 gal (US))
Steering
Steering Cylinder, Double Acting - Stroke 438 mm (17.2 in)
Loader Hydraulic System
Relief Pressure - Tilt Cylinder 28000 kPa (4061 psi)
Tilt Cylinder, Double Acting - Stroke 516 mm (20.3 in)
Maximum Flow - Implement Pump 150 l/min (40 gal/min)
Maximum Working Pressure - Implement Pump 26000 kPa (3771 psi)
Transmission
Forward and Reverse - Range 2 13 km/h (8 mile/h)
Service Refill Capacities
Engine Crankcase 20 l (5.3 gal (US))
Steering
Note (1) Steering system uses a dedicated load sensing variable displacement pump with dual double acting cylinders.
Loader Hydraulic System
Cycle Times - Performance (HP+) at 1,800 rpm/Standard Power Mode at 1,600 rpm - Total Cycle Time 9.6/10.5 seconds
Steering
Maximum Working Pressure - Steering Pump 24130 kPa (3500 psi)
Loader Hydraulic System
Tilt Cylinder, Double Acting - Bore Diameter 140 mm (5.5 in)
Power Train
Rear Axle - Traction Aid - Optional Limited slip differential
Transmission
Forward and Reverse - Range 3 27 km/h (17 mile/h)
Loader Hydraulic System
Tilt Cylinder, Double Acting - Rod Diameter 75 mm (3 in)
Power Train
Note (3) *Differential front locking axle can be engaged on the go at full torque to 10 km/h (6.2 mph) on the 926M.
Service Refill Capacities
Hydraulic Tank 90 l (23.8 gal (US))
Power Train
Front Axle Fixed
Loader Hydraulic System
Lift Cylinder, Double Acting - Rod Diameter 60 mm (2.4 in)
Lift Cylinder, Double Acting - Bore Diameter 110 mm (4.3 in)
Steering
Maximum Flow - Steering Pump 130 l/min (34 gal/min)
Service Refill Capacities
Hydraulic System - Including Tank 160 l (42.3 gal (US))
Transmission
Forward and Reverse - Range 1* 1-13 km/h (0.6-8 mph)
Service Refill Capacities
Cooling System 30 l (7.9 gal (US))
Power Train
Rear Axle - Oscillation Angle by Tire Size - 17.5 R25 u00b1 13.5 degrees
Steering
Steering Cylinder, Double Acting - Bore Diameter 70 mm (2.8 in)
Steering Cycle Times - Full Left to Full Right - Maximum RPM: 90 rpm Steering Wheel Speed 2.4 s (2.4 s)
Cab
FOPS ISO 3449:2005 LEVEL II
Power Train
Note (2) Offset rims available to meet European roading requirements.
Front Axle - Traction Aid* Locking differential (standard)
Rear Axle - Oscillation Angle by Tire Size - 20.5 R25, 550/65, 600/65, 650/65 u00b1 10.5 degrees
Steering
Steering Cylinder, Double Acting - Rod Diameter 40 mm (1.6 in)
Loader Hydraulic System
Maximum Flow - Implement Pump - 4th Function Maximum Flow* 150 l/min (40 gal/min)
Steering
Note (2) Flow values listed are for a machine running in Performance Power Mode (1,800 rpm).
Power Train
Note (1) Power train is governed by the Caterpillar exclusive Intelligent Power Management system to deliver peak performance and efficiency.
Service Refill Capacities
Rear Axles 25 l (6.6 gal (US))
Transmission
Forward and Reverse - Range 4 40 km/h (25 mile/h)
Steering
Steering Cycle Times - Full Left to Full Right - Minimum RPM: Pump Flow Limited 2.8 s (2.8 s)
Air Conditioning System
Air Conditioning The air conditioning system on this machine contains the fluorinated greenhouse gas refrigerant R134a (Global Warming Potential u2013 1430. The system contains 1.9 kg of refrigerant which has a CO2 equivalent of 2.717 metric tonnes.
Loader Hydraulic System
Relief Pressure - Tilt Cylinder - 3rd and 4th Function Relief Pressure 28000 kPa (4061 psi)
Service Refill Capacities
Fuel Tank 195 l (51.5 gal (US))
Loader Hydraulic System
Relief Pressure - Tilt Cylinder - 3rd and 4th Function Maximum Working Pressure 26000 kPa (3771 psi)
Power Train
Brakes - Service Inboard wet disc
Cab
Note (1) * Measurements were conducted with cab doors and windows closed and at 70% of maximum engine cooling fan speed. Sound level may vary at different engine cooling fan speeds.
Loader Hydraulic System
Lift Cylinder, Double Acting - Stroke 728 mm (28.7 in)
Service Refill Capacities
Front Axles 26 l (6.9 gal (US))
Loader Hydraulic System
Cycle Times - Performance (HP+) at 1,800 rpm/Standard Power Mode at 1,600 rpm - Dump (at Maximum Lift Height) 1.5/1.7 seconds
Cycle Times - Performance (HP+) at 1,800 rpm/Standard Power Mode at 1,600 rpm - Raise (Ground Level to Maximum Lift) 5.5/6.2 seconds
Note (2) Flow values listed are for a machine running in Performance Power Mode (1,800 rpm).
Service Refill Capacities
Transmission - Gear Box 8.5 l (2.2 gal (US))
Cab
Declared Sound Levels Declared Sound Levels
u2013 Operator Sound Pressure Level (ISO 6396:2008): 68 dB(A)*
u2013 Exterior Sound Power Level (ISO 6395:2008): 101 dB(A)*
Power Train
Rear Axle Oscillating
Loader Hydraulic System
Note (1) Implement system uses a dedicated load sensing variable displacement pump with dual double acting lift cylinders and a single double acting tilt cylinder.
Power Train
Brakes - Parking Spring applied hydraulically released
Transmission
Note * Creeper control allows maximum speed range adjustability from 1 km/h (0.6 mph) to 13 km/h (8 mph) in Range 1 through the secondary display when equipped. Factory default is 7 km/h (4.4 mph).
Loader Hydraulic System
Note (3) * 3rd and 4th function flow is fully adjustable from 20% to 100% of maximum flow through the secondary display when equipped.
Cycle Times - Performance (HP+) at 1,800 rpm/Standard Power Mode at 1,600 rpm - Float Down (Maximum Lift to Ground Level) 2.6/2.6 seconds
Maximum Flow - Implement Pump - 3rd Function Maximum Flow* 150 l/min (40 gal/min)
Operating Specifications
Note (1) **Aggregate Handler machine equipped with full counterweight and optional guards.
Full Turn Tip Load (2) 8148 kg (17,962 lb)~
Full Turn Tip Load (1) 8047 kg (17,740 lb)**
Note (2) ~Aggregate Handler equipped with full counterweight, optional guards, roading fenders, and cold start package.

Standard Equipment

  • POWER TRAIN
    • Axle Duo-Cone™ seal guards
    • Auto idle shut down feature
    • Cat C7.1 engine
      – Power modes (Standard and Performance)
      – Power by range (High Power in Range 4)
      – Turbocharged and aftercooled
      – Diesel particulate filter (Fit for Life)
    • Coded start (requires secondary display)
    • Differential lock in front axle
    • Enclosed wet disc full hydraulic brakes
    • Hydraulically driven demand cooling fan
    • Hydrostatic transmission with electronic control
      – Operator modes (Default, TC, Hystat, and Ice)
      – Directional Shift Aggressiveness (fast, medium, slow)
      – Rimpull control, adjust wheel torque
      – Creeper control, adjust ground speed
    • Parking brake, electric
    • Single plane cooling package wide six fins per inch density
    • Oil sampling ports
    • Throttle lock and max speed limiter
  • HYDRAULICS
    • Automatic lift lower and tilt kickouts, adjustable in-cab
    • Bucket and fork modes, adjustable in-cab
    • Cylinder damping at kickout and mechanical end stops
    • Fine mode control (fast, medium, slow)
    • Hydraulic response setting (fast, medium, slow)
    • Load sensing hydraulics and steering
    • Seat-mounted hydraulic joystick controls
  • ELECTRICAL
    • Alternator, 115 amp, heavy duty
    • Batteries, 1,000 CCA (2) 24V system, disconnect switch
    • Back-up alarm
    • Emergency shutdown switch
    • Halogen work and roading lights, LED rear tail lights
    • Product Link PRO with three year subscription
    • Remote jump start post
    • Resettable main and critical function breakers
  • OPERATOR ENVIRONMENT
    • 75 mm (3 in) High-Vis retractable seat belt, with audible alarm and indicator
    • Automatic temperature control
    • Cab, pressurized
    • Camera, rearview
    • External heated mirrors with lower parabolic
    • Ground level cab door release
    • Hydraulic control lockout
    • Mirror, single
    • Lunch box storage
    • Radio ready speakers
    • Rear window defrost, electric
    • Column mounted multi function control – lights, wipers, turn signal
    • Tilt and telescopic steering wheel
    • Tinted front glass
    • Wet arm wiper/washer, 2-speed and intermittent, front, lights, wipers, turn signal
    • Suspension seat, fabric
  • OTHER STANDARD EQUIPMENT
    • Large-access enclosure doors with adjustable close/open force
    • Cat optimized Z-bar linkage with parallel lift
    • Recovery hitch, with pin
    • Remote mounted lubrication points
    • Lockable compartments and enclosures

Optional Equipment

  • OPTIONAL EQUIPMENT
    • Autolube, integrated in secondary display
    • Auxiliary flow, third and fourth function
    • Differential, limited slip, rear
    • Beacon light, strobe
    • Cab, deluxe (standard in Europe)
      – Camera, rearview integrated into advanced display
      – Electrically adjustable external heated mirrors (2)
      – Secondary display to enable features and adjust parameters
      – LED interior lighting
      – Sunscreen, front and rear
      – Touchscreen secondary display
      – Ride control adjustable speed activation
      – Preventative maintenance reminders
      – Integrated help function (26 languages)
    • Camera, roof mounted, front view with separate display
    • Cold start package
      – Ether starting aid, block heater and additional batteries, 1,000 CCA (4 total)
    • Counterweight, additional options
    • Coupler, (Fusion and ISO 23727)
    • Debris packages (low, medium, high)
    • Fenders (extended cover and full coverage)
    • Guarding packages
    • Linkage, high lift
    • Lights, auxiliary, halogen or LED with engine and DEF compartment lights
    • Payload Technology
      – Cat Production Measurement (CPM)
      – CPM Printer
    • Product Link ELITE with capabilities for software push, data logging, histogram and trend mapping
    • Radio packages
    • Rear Object Detection
    • Ride Control System, adjustable through secondary display
    • Seats
      – Deluxe seat – fully adjustable fabric air suspension seat with mid seat backrest
      – Premium seat – fully adjustable leather and fabric air suspension with high backrest and air lumbar support. Seat is heated and ventilated on bottom cushion and backrest.
    • Steering
      – Dual mode and secondary
    • Tire Pressure Monitoring (TPM)

Enquiry Form

    REQUEST A CALL BACK
    This site is protected by reCAPTCHA and the Google Privacy Policy and Terms of Service apply.