Enquire about "3616 Generator Set (Medium Speed)" Now
3616 Generator Set (Medium Speed)
Cat Diesel Engine
Generator
World Wide Product Support
Cat dealers provide extensive post-sale support including maintenance and repair agreements. Cat dealers have over 1,800 dealer branch stores operating in 200 countries. The Caterpillar S•O•S℠ program cost effectively detects internal engine component condition, even the presence of unwanted fluids and combustion by-products
Full Range of Attachments
Wide range of bolt-on system expansion attachments, factory designed and tested Flexible packaging options for easy and cost effective installation
| Generator Set Specifications | |
|---|---|
| Minimum Rating | 3350 ekW |
| Maximum Rating | 5320 ekW |
| Emissions/Fuel Strategy | Low Fuel Consumption |
| Frequency | 60 Hz |
| Speed | 720 & 900 rpm |
| Duty Cycle | Prime, Continuous |
| Engine Specifications | |
|---|---|
| Engine Model | 3616 V-16,4-Stroke Water-Cooled Diesel |
| Bore | 280 mm (11 in) |
| Stroke | 300 mm (11.8 in) |
| Displacement | 296 l (18032 inu00b3) |
| Compression Ratio | 13:01 |
| Aspiration | TA |
| Fuel System | Direct unit injection |
| Governor Type | Generator Set Monitoring System (GMS) |
| Generator Set Dimensions | |
|---|---|
| Length - Maximum | 10261.7 mm (404 in) |
| Width - Maximum | 2530.3 mm (99.62 in) |
| Height - Maximum | 3977.7 mm (156.6 in) |
| Dry Weight - Genset (maximum) | 64470 kg (141840 lb) |
Standard Equipment
- Air Inlet System
- Aftercooler, fresh water, corrosion resistant coated (air side)
- Air inlet shutoff
- Air Cleaner
- Breather, crankcase, top-mounted
- Turbocharger, watercooled, engine oil lubricated
- Cooling System
- Engine coolant water drains
- Front Mounted Turbos
- Three-bundle oil cooler
- Water Temperature Regulator
- Jacket Water Thermostats
- Exhaust System
- 457 mm (18 in) Cat bolt pattern
- Dry, Gas Tight, Exhaust Manifold
- Includes Adapter, Flexible Exhaust Fitting
- Fuel System
- Simplex or Duplex
- Generator System
- Custom Generator per Generator Data Sheet completed by Dealer
- Governor System
- UG Actuator
- Lube System
- Centrifugal Oil Filters with Single Shutoff
- Service Side Engine mounted on Cylinder Block Inspection Covers
- Wet Oil Sump. Includes engine-driven main Lubrication & Oil pumps, Oil Lines and Oil Pan
- Oil Filler and Dipstick
- Oil Pressure Regulating Valve
- Crankcase Explosion Relief Valves
- Mounting System
- Damper, Torsional Vibration
- Engine and Generator Mounting
- Starting / Charging System
- Vane Type Air Starter
- Two Motors, engine mounted at rear, on left side
- Air Silencer
- Line Group for Single Point Custom Connection
- General:
- Paint, Caterpillar Yellow
- Gear driven Pumps: Fuel, Oil, Jacket Water, Aftercooler / Oil Cooler Water
Optional Equipment
- Air Inlet System
- Soot Filter
- Air cleaner Louver Assembly
- Vertical Support Bracket
- Heavy Duty Air Cleaner
- Air Inlet Adapter
- Boost Control Valve
- Cooling System
- Heat Exchanger for Single Circuit
- Heating Aids
- Cooling System Aids
- Auxiliary Water Pump
- Expansion Tank
- Exhaust System
- Flexible Exhaust Fittings
- Weld Flange and Related Hardware
- Fuel System
- Fuel Priming Pump
- Duplex Primary Fuel Strainer
- Fuel System Connections
- Generator System
- 3 Phase, Six Leads, WYE
- Class F Insulation
- Bus Bar Connections
- Winding Temperature Detectors
- Anti-condensation Space Heaters
- Governor System
- Electronic / Actuators
- Digital Programmers
- Battery Backup / Power Supply
- 230 UA
- 723 Plus
- EGB Actuator
- Lube System
- Oil Pan Drain Valve
- Lube ANSI Adapter (Emergency connection)
- Mounting System
- Isolator
- Spring Type Vibration Isolator
- Vertically Restrained
- Non-vertically Restrained
- Starting / Charging System
- Pressure Reducing Valve
- Compressed Air Flex Hose
- Turbine Type Air Starters
- Redundant Air Starters
- General:
- Custom Paint Colors