3608 Generator Set (Medium Speed)

Cat Diesel Engine

Generator

Worldwide Product Support

Full Range of Attachments

Generator Set Specifications
Maximum Rating 3575 kVA
Minimum Rating 2363 kVA
Emissions/Fuel Strategy Low Fuel Consumption
Frequency 50 Hz
Speed 750 & 1000 rpm
Duty Cycle Standby, Prime, Continuous
Engine Specifications
Engine Model 3608 I-8,4-Stroke Water-Cooled Diesel
Bore 280 mm (11 in)
Stroke 300 mm (11.8 in)
Displacement 148 l (9064 inu00b3)
Compression Ratio 13:01
Aspiration TA
Fuel System Direct unit injection
Governor Type Generator Set Monitoring System (GMS)
Generator Set Dimensions
Length - Maximum 10261.7 mm (404 in)
Width - Maximum 2530.3 mm (99.62 in)
Height - Maximum 3977.7 mm (156.6 in)
Dry Weight - Genset (maximum) 41390 kg (91050 lb)

Standard Equipment

  • Air Inlet System
    • Breather, crankcase, top-mounted
    • Aftercooler, fresh water, corrosion resistant coated (air side)
    • Turbocharger, watercooled (750 rpm and HFO), engine oil lubricated
    • Air inlet shutoff
  • Cooling System
    • Water temperature regulator
    • Jacket water thermostats
    • Engine coolant water drains
  • Exhaust System
    • 457 mm (18 in) Cat bolt pattern
    • Includes adapter, flexible exhaust fitting
    • Dry, gas tight, exhaust manifold
  • Fuel System
    • Simplex or duplex
  • Generator System
    • Custom generator per generator data sheet completed by dealer
  • Governor System
    • UG Actuator
  • Lube System
    • Service side engine mounted on cylinder block inspection covers
    • Centrifugal oil filters with single shutoff
    • Crankcase explosion relief valves
    • Wet oil sump. Includes engine-driven main lubrication and oil pumps, oil lines and oil pan
    • Oil filler and dipstick
    • Oil pressure regulating valve
  • Mounting System
    • Engine and generator mounting
    • Damper, torsional vibration
  • Starting / Charging System
    • Line group for single point custom connection
    • Air silencer
    • One motor, engine mounted at rear, on left side
    • Vane type air starter
  • General:
    • Paint, Caterpillar yellow
    • Gear driven pumps: Fuel/oil/jacket water/Aftercooler/Oil cooler water

Optional Equipment

  • Air Inlet System
    • Air cleaner louver assembly
    • Air inlet adapter
    • Heavy duty air cleaner
    • Vertical support bracket
    • Soot filter
    • Boost control valve
  • Cooling System
    • Expansion tank
    • Auxiliary water pump
    • Heating aids
    • Cooling system aids
  • Exhaust System
    • Flexible exhaust fittings
    • Weld flange and related hardware
  • Fuel System
    • Duplex primary fuel strainer
    • Fuel priming pump
    • Fuel system connections
  • Generator System
    • Winding temperature detectors
    • Anti-condensation space heaters
    • Busbar connections
    • 3 Phase, six Leads, WYE
    • Class F insulation
  • Governor System
    • Digital programmers
    • 2301 A load share
    • 723 Plus
    • EGB actuator
    • Electronic/actuators
    • Battery backup/power supply
  • Lube System
    • Oil pan drain valve
    • Lube ANSI adapter (Emergency connection)
  • Mounting System
    • Spring type vibration isolators
    • Non-vertically restrained
    • Vertically restrained
    • Isolator
  • Starting / Charging System
    • Pressure reducing valve
    • Compressed air flex hose
  • General:
    • Custom paint colors

Enquiry Form

    REQUEST A CALL BACK
    This site is protected by reCAPTCHA and the Google Privacy Policy and Terms of Service apply.