3606 Generator Set (Medium Speed)

CALCULATE FINANCE

Cat Diesel Engine

SR5 Alternator

Worldwide Product Support

Full Range of Attachments

Generator Set Specifications
Maximum Rating 2688 kVA
Minimum Rating 1775 kVA
Emissions/Fuel Strategy Low Fuel Consumption
Frequency 50 Hz
Speed 750 & 1000 rpm
Duty Cycle Continuous
Engine Specifications
Engine Model 3606 I-6, 4-Stroke Water-Cooled Diesel
Bore 280 mm (11 in)
Stroke 300 mm (11.8 in)
Displacement 111 l (6762 inu00b3)
Compression Ratio 13:01
Aspiration TA
Fuel System Direct unit injection
Governor Type Generator Set Monitoring System (GMS)
Generator Set Dimensions
Length - Maximum 10261.7 mm (404 in)
Width - Maximum 2530.3 mm (99.62 in)
Height - Maximum 3977.7 mm (156.6 in)
Dry Weight - Genset (maximum) 34070 kg (74970 lb)

Standard Equipment

  • Air Inlet System
    • Breather, crankcase, top-mounted
    • Air inlet shutoff
    • Turbocharger, watercooled (750 rpm and HFO), engine oil lubricated
    • Aftercooler, fresh water, corrosion resistant coated (air side)
  • Cooling System
    • Water temperature regulator
    • Engine coolant water drains
    • Jacket water thermostats
  • Exhaust System
    • 457 mm (18 in) Cat bolt pattern
    • Dry, gas tight, exhaust manifold
    • Includes adapter, flexible exhaust fitting
  • Fuel System
    • Simplex or duplex
  • Generator System
    • Custom generator per generator data sheet completed by dealer
  • Governor System
    • UG Actuator
  • Lube System
    • Oil pressure regulating valve
    • Wet oil sump. Includes engine-driven main lubrication and oil pumps, oil lines and oil pan
    • Oil filler and dipstick
    • Crankcase explosion relief valves
    • Service side engine mounted on cylinder block inspection covers
    • Centrifugal oil filters with single shutoff
  • Mounting System
    • Damper, torsional vibration
    • Engine and generator mounting
  • Starting / Charging System
    • One motor, engine mounted at rear, on left side
    • Vane type air starter
    • Air silencer
    • Line group for single point custom connection
  • General:
    • Paint, Caterpillar yellow
    • Gear driven pumps: Fuel/oil/jacket water/Aftercooler/Oil cooler water

Optional Equipment

  • Air Inlet System
    • Boost control valve
    • Soot filter
    • Heavy duty air cleaner
    • Air inlet adapter
    • Vertical support bracket
    • Air cleaner louver assembly
    • Air cleaner
  • Cooling System
    • Expansion tank
    • Auxiliary water pump
    • Cooling system aids
    • Heating aids
  • Exhaust System
    • Weld flange and related hardware
    • Flexible exhaust fittings
  • Fuel System
    • Fuel system connections
    • Duplex primary fuel strainer
    • Fuel priming pump
  • Generator System
    • Class F insulation
    • 3 Phase, six Leads, WYE
    • Anti-condensation space heaters
    • Winding temperature detectors
    • Busbar connections
  • Governor System
    • Electronic/actuators
    • Digital programmers
    • 2301 A load share
    • EGB actuator
    • Battery backup/power supply
    • 723 Plus
  • Lube System
    • Oil pan drain valve
    • Lube ANSI adapter (Emergency connection)
  • Mounting System
    • Non-vertically restrained
    • Spring type vibration isolators
    • Vertically restrained
    • Isolator
  • Starting / Charging System
    • Compressed air flex hose
    • Pressure reducing valve
  • General:
    • Custom paint colors

Enquiry Form

    REQUEST A CALL BACK
    This site is protected by reCAPTCHA and the Google Privacy Policy and Terms of Service apply.