3512C Generator Set

  • Overview
  • View product Download
CALCULATE FINANCE

Cat Generator Set Package

Cat Diesel Engine

SR5 Alternator

EMCP 4 Control Panel

Cooling System

Certifications

One Safe Source

World Wide Product Support

Generator Set Specifications
Minimum Rating 1230 ekW
Maximum Rating 1500 ekW
Emissions/Fuel Strategy U.S. EPA Certified
Voltage 380 to 13800 Volts
Frequency 60 Hz
Speed 1800 rpm
Duty Cycle Standby, Mission Critical, Prime, Continuous
Engine Specifications
Engine Model 3512C ATAAC, V-12, 4-Stroke Water-Cooled Diesel
Bore 170 mm (6.69 in)
Stroke 190 mm (7.48 in)
Displacement 51.8 l (3161.03 inu00b3)
Compression Ratio 14.7:1
Aspiration TA
Fuel System Electronic unit injection
Governor Type Adem™3
Generator Set Dimensions
Length - Maximum 6319.4 mm (248.6 in)
Width - Maximum 2281.2 mm (89.8 in)
Height - Maximum 2794 mm (110 in)
Dry Weight - Genset (maximum) 13970 kg (30790 lb)

Standard Equipment

  • Air Inlet System
    • Air cleaner; single element canister type with service indicator
  • Air Inlet
    • Air Cleaner
  • Cooling
    • Package mounted radiator
  • Exhaust
    • Exhaust flange outlet
  • Fuel
    • Secondary fuel filter
    • Primary fuel filter with integral water separator
    • Fuel priming pump
  • Generator
    • Matched to the performance and output characteristics of Cat engines
    • IP23 Protection
  • Power Termination
    • Bus Bar
  • Control Panel
    • EMCP 4 Genset Controller
  • Control System
    • Alarm acknowledge
    • Over / under frequency (81 o/u)
    • Reverse Power (kW) (32)
    • Coolant temperature
    • kVAr (per phase, average & percent)
    • Overcurrent (50 / 51)
    • High coolant temperature
    • Environmental sealed front face
    • Reverse Reactive Power (kVAr) (32RV)
    • kVA (per phase, average & percent)
    • Volts (L-L & L-N)
    • Generator set packages include Caterpillar’ s Voltage
      Regulator (IVR). IVR includes reactive droop capability, 3-phase voltage sensing, KVAR / PF modes, RFI suppression, min/max exciter. Limiter and exciter diode monitor
    • kW-hr (total)
    • kW (per phase, average & percent)
    • Low oil pressure
    • EMCP 4.2B
    • Digital indication for:
    • Engine cool-down timer
    • Generator mounted – rear facing
    • DC volts
    • 1 programmable relay outputs (Form C)
    • Overspeed
    • kVAr-hr (total)
    • 1 programmable digital outputs
    • Communications
    • Power Factor (per phase & average)
    • Oil pressure (psi, kPa or bar)
    • True RMS AC metering, 3-phase, +/-2% accuracy
    • Cat Connect
    • Customizable screens
    • Low coolant temperature
    • Over / under voltage (27 / 59)
    • 4 programmable relay outputs (Form A)
    • Accessory module data link
    • Warning / shutdown with common LED indication of shutdowns for:
    • Failure to start (overcrank)
    • Amps (per phase & average)
    • Auto / start / stop control
    • Controls:
    • Engine cycle crank
    • Customer data link (Modbus RTU)
    • Programmable protective relaying functions:
    • Text alarm / event descriptions
    • Emergency stop
    • Speed adjust
    • Number of I/O varies on options selected
    • Lamp test
    • RPM
    • 24 Volt DC operation
    • Emergency stop pushbutton
    • Low coolant level
    • Frequency (Hz)
    • Generator phase sequence
    • Load histogram feature
    • PLC functionality
  • Cooling System
    • Coolant level sensors (Not included with packages without radiator)
    • SCAC
    • Radiator fan and fan drive
    • Coolant drain line with valve
    • Fan and belt guards
    • Caterpillar extended life coolant (Not included with packages without radiator, installed SF44CTS
       
  • Exhaust System
    • Flanged faced outlet(s)
    • Dry exhaust manifold
  • Fuel System
    • Fuel cooler; not included with packages without radiator
    • Secondary fuel filters
    • Flexible fuel lines – shipped loose
    • Fuel priming pump
  • Generators and Attachments
    • Medium voltage:
    • Internal excitation
    • High voltage
    • Permanent magnet
    • Winding temperature detectors
    • NEMA Class H insulation, Class H temperature rise at 40C ambient
      (125C prime/150C standby)
    • Bus bar connections, right side extension box, bottom cable entry
    • Busbar connections, top center mounted, top cable entry
    • Low voltage:
    • Class H insulation, Class F temperature rise at 40C ambient
      (105C prime/130C standby)
    • NEMA Class H insulation, Class H temperature rise at 40C ambient
      (125C prime / 150C standby)
    • NEMA standard hole pattern
    • 3 phase brushless, salient pole
    • NEMA standard hole pattern
    • 6 Leads
       
    • Random wound
    • NEMA standard hole pattern
    • Form wound
  • Governing System
    • ADEM III
  • Literature
    • English
  • Lube System
    • Gear type lube oil pump
    • Oil filter, filler and dipstick
    • Fumes disposal
    • Lubricating oil
    • Oil drain lines and valve
    • Integral lube oil cooler
  • Mounting System
    • Rubber anti-vibration mounts (shipped loose)
  • Starting / Charging System
    • 45 Amp charging alternator
    • Battery and battery rack w/cables
    • Battery disconnect switch
    • 24 Volt electric starting motor
  • General
    • Flywheel and Flywheel housing-SAE No. 00
    • SAE Standard Rotation
    • Right hand servicing
    • Paint: Caterpillar yellow with high gloss black rails & radiator

Optional Equipment

  • Control Panels
    • EMCP 4.3, EMCP 4.4
  • Exhaust
    • Exhaust mufflers
  • Air Inlet System
    • Heavy duty air cleaner
    • Single element filter
  • Generator
    • Permanent magnet excitation (PMG)
    • Oversize and premium generators
    • Internal excitation (IE)
    • Anti-condensation heater
  • Cooling System
    • Coolant
    • Standard installed ATAAC radiators
    • Optional installed ATAAC radiators
    • Optional installed radiators
    • Water level switch gauges
    • Standard installed radiators
  • Power Termination
    • Circuit breakers, IEC compliant
    • Circuit breakers, UL listed
  • Exhaust System
    • Flanges
    • Flange and exhaust expanders
    • Y Adapters
    • Flexible fittings
    • Elbows
    • Mufflers
  • Fuel System
    • Primary fuel filter
  • General
    • US aid emblem
  • Mounting
    • IBC isolators
    • Rubber anti-vibration mounts
    • Spring-type vibration isolator
  • Generators and Attachments
    • Differential current transformers (DCT) 15 kV class
    • RW, IE, 6 leads, Pitch 0.6667
    • Differential current transformers (DCT) 8.7 kV class
    • 1400, 1600, 2700 Frames
    • Space heater
    • Generator air cleaner
    • Generator conversion from IE to PM
    • Low Voltage: 380,440 / 480 Volts, 3 Phase, 1800 rpm
  • Starting/Charging
    • Jacket water heater
    • Air starting motor with control and silencer
    • Battery chargers
    • Charging alternator
    • Heavy-duty starting system
    • Oversize batteries
  • Instrumentation
    • Wiring GP W/O cyl sensors
    • Pyrometer and thermocouples
  • Lube System
    • Prelube pumps
    • Oil level regulator
    • Oil drains
    • Lubrication oil in standard sump
  • Crankcase Protection
    • No explosion relief valves
    • No crankcase explosion relief valve
    • Explosion relief valve
    • Crankcase ventilation system
  • Mounting System
    • Puck style low efficiency isolators
    • IBC vibration isolators
    • Spring type vibration isolators
  • Power Connections
    • Cable entry – Right side
    • Center post buss bar
    • Rear power connections
    • Right side power connections
    • 2000, 2500,3200 Amp, 3 Pole, IEC Rated Circuit Breakers
    • 1600 ,2000, 2500, 3000, 4000 Amp, 3 Pole, UL-100% rated circuit breakers
    • Left side power connections
    • Six lead, six terminal option
    • 2000, 2500 Amp, 4 Pole, IEC Rated Circuit Breakers
    • Neutral ground connections
    • Grounding groups
  • Special Tests / Reports
    • Standard engine test charge
    • PGS test report @ 1.0 power factor
    • CSA certification
    • IBC seismic certification
    • Fuel consumption test
    • Torsional vibration analysis
    • Generator test report
    • Generator fuel consumption test
    • PGS test report @ 0.8 power factor
  • Starting / Charging System
    • 10 Amp battery charger
    • 24 Volt battery set – Dry
    • Engine barring device
    • 35 Amp battery charger
    • Air starting motor
    • Air pressure regulator
    • Batteries, racks and cables:
    • Jacket water heaters
    • Electric starting motors
    • Starter covers

Enquiry Form

REQUEST A CALL BACK