VM 32 E Marine Generator Set

  • Overview
  • View product Download
CALCULATE FINANCE

Ease of installation

Part load optimization kit (PLK) for constant speed available.

Flexible Camshaft Technology (FCT) allows lower SFOC at part load area.

Technically lower risk
 - application of existing technology

Generator Set Specifications
Minimum Rating 6099 kWe (7632 kVA)
Maximum Rating 8593 kWe (10752 kVA)
Engine Specifications
Configuration 12,16 Cylinder
Bore 320 mm (10 in)
Stroke 460 mm (15.78 in)
Swept Volume 37 l/cyl (1244.88 inu00b3)
Generator Set Specifications
Emissions/Fuel Strategy IMO II
Generator Set Dimensions and Weights - Dependent on Generator Type
Length 10703 mm - 12149 mm (421.4 in - 478.3 in)
Width 3526 mm (138.8 in)
Weight 120.0 t - 140.0 t (264554 lbs - 308647 lbs)
Height 4639 mm (182.6 in)

Standard Equipment

  • Air Inlet System
    • Air intake silencer / filter
  • Control System
    • Protection system (external cabinet)
    • Serial link interface (MODbus / canbus)
    • Speed governor
  • Cooling System
    • Electric cooling water preheater
    • HT cooling water pump (engine driven)
    • 2-stage charge air cooler
  • Exhaust System
    • Exhaust gas expansion joint
    • Exhaust gas insulated manifolds
    • Turbocharger at counter-flywheel end
  • Fuel System
    • Fuel circulating pump (electric driven / for MDO/MGO only)
    • Fuel indicator filter
    • Fuel pressure valve (separate / for MDO/MGO only)
  • Instrumentation
    • Control push buttons and lamps
    • Emergency stop lever
    • Local control panel
    • Pressure and temperature indicator
  • Lube System
    • Engine with dry sump
    • Lube oil plate cooler (separate)
    • Lube oil pump (engine driven)
    • Lube oil safety filter
    • Lube oil self-cleaning filter (separate)
    • Oil sump in base frame
    • Pre-lubricating oil pump (electr. Driven/fitted on base frame)
    • Pressure regulating valve
  • Mounting System
    • Engine resiliently mounted on base frame, base frame mounted rigidly
    • Flexible pipe connections
    • High flexible coupling
  • Starting System
    • Electrical barring device
    • Starting air valve
  • General
    • Engine, flexible coupling and generator mounted on a common base frame
    • Flywheel cover
    • Lifting device (rental)
    • Torsional Vibration Calculation (TVC)

Optional Equipment

  • Air Inlet System
    • Air inlet shut-off valve
    • Air intake transition piece
    • Expansion joint
    • Silencer / filter
  • Control System
    • Electronic speed governor
    • Engine alarm system
    • Remote indicators (start air pressure, engine speed, etc.)
    • Starter for electric driven pumps
    • 24 DC UPS
  • Cooling System
    • CW piping for generator cooling on base frame
    • CW piping for lubricating oil cooler on base frame
    • FW/SW plate cooler
    • HT cooling water pump (electric driven)
    • LT cooling water pump (electric driven)
    • Sea water cooling pump (electric driven)
    • Temperature control valve
  • Exhaust System
    • Silencer (with or without spark arrester)
  • Fuel System
    • Fuel oil cooler
    • HFO final preheater
    • HFO pressure regulating valve
    • HFO self-cleaning automatic filter
    • HFO supply and booster pumps (electrical driven)
    • HFO treatment and supply modules
    • HFO viscosity control device
    • Mixing tank
  • Lube System
    • Lube oil centrifuge
    • Lube oil pump (electrical driven)
    • Lube oil treatment and combined modules
    • Temperature control valve
  • Mounting System
    • Resilient mounting on base frame
  • Starting System
    • Starting air compressor
    • Starting air receiver
  • General
    • Generator customer supply

Enquiry Form

REQUEST A CALL BACK
This site is protected by reCAPTCHA and the Google Privacy Policy and Terms of Service apply.