Enquire about "H35Es Hydraulic Hammer" Now
Used in a wide range of construction and light demolition applications
- such as breaking concrete sidewalks and driveways, pavement, roads, masonry, site prep and landscaping, and breaking frozen ground for utility repairs.
Fully enclosed, silenced housing lowers overall noise level for a quieter, safer job site. Internal power cell is protected, designed and engineered to eliminate stress points.
Flat Top/Top-Mount Style
Flat top/top-mount style provides a larger work area and excellent operator visibility with a common footprint and hole pattern for optimum versatility. Top-mount style increases impact power by keeping breaker force and stick force in line. A top-mount bracket will transfer back significantly less recoil and bending stress into the end of the stick, resulting in reduced impact on machine structures. Full complement of mounting brackets is available to suite coupler or pin-on preference.
Auto Shut Off (ASO)
ASO instantly stops the piston when breaking through material, preventing blank firing, a key contributor to hammer wear. Internal stresses are reduced, hammer is protected regardless of operator skill level.
Integral accumulator on H55Es/H65Es provides additional protection for the machine’s hydraulic system.
Tri-Suspension system comprises the suspension jacket, the upper and lower buffers. Suspension aligns power cell and gives manageable, smooth peformance.
Standing Height Grease Point
Standing height grease point makes required maintenance comfortable and easy to perform.
Easy to Tune & Maintain
Gas ports and valves are easy to check and charge while hammer is mounted to machine.
Ports positioned for Hose protection
Improved routing protects against force and dirt during impact, eliminating downtime.
Tools are heat-treated, matched to piston diameter and provide optimum mass to deliver full blow energy.
|Impact Frequency||600-1800 bpm|
|Operating Weight - With Tool||130 kg (287 lb)|
|Optimal Hydraulic Flow||12-35 lpm (3-9 gpm)|
|Tool Shaft Diameter||40 mm (1.6 in)|
|Overall Width||300 mm (12 in)|
|Overall Length||311 mm (12 in)|
|Overall Height||860 mm (34 in)|
|Height - Without Tool||620 mm (25 in)|
|Impact Energy Class||407 J (300 ft·lbf)|
|Minimum Operating Pressure||10000 kPa (1450 psi)|
|Minimum Carrier Weight||1102 kg (2430 lb)|