D11T/D11T CD Dozer

  • Overview
  • Finance With CavPower
  • Optional Services
  • View product Download
CALCULATE FINANCE

Structures

Engine

Emissions Technology

Cooling System

Power Train

Undercarriage

Operator Station

Integrated Technologies

Cat MineStar

Safety

Work Tools

Serviceability

Customer Support

Sustainability

Engine
Engine Model Cat® C32 ACERT™
Flywheel Power 634 kW (850 HP)
Bore 145 mm (5.7 in)
Stroke 162 mm (6.4 in)
Displacement 32.1 l (1959 inu00b3)
Engine Power - Net SAE J1349/ISO 9249 634 kW (850 HP)
Engine Power - ISO 14396 692 kW (928 HP)
Engine Power - Gross SAE J1995* 695 kW (932 HP)
Net SAE J1349/ISO 9249 634 kW (850 HP)
Emissions Tier 2 Equivalent
Weights
Operating Weight 104236 kg (229800 lb)
Shipping Weight 37485 kg (82640 lb)
Operating Weight - CD 112718 kg (248500 lb)
Shipping Weight - CD 37802 kg (83340 lb)
Transmission
1 Forward 3.9 km/h (2.4 mile/h)
2 Forward 6.8 km/h (4.2 mile/h)
3 Forward 11.8 km/h (7.3 mile/h)
1 Reverse 4.7 km/h (2.9 mile/h)
2 Reverse 8.2 km/h (5.1 mile/h)
3 Reverse 14 km/h (8.7 mile/h)
Type Planetary powershift
Transmission Clutch Diameter 533 mm (21 in)
Hydraulic Controls
D11T - Combined Pump Output - Implement 620 l/min (164 gal/min)
D11T - Tilt Pump Flow 155 l/min (41 gal/min)
D11T CD - Ripper (Lift) Relief Valve Setting 24135 kPa (3500 psi)
D11T CD - Tilt Cylinder Flow 250 l/min (66 gal/min)
D11T CD - Tilt Cylinder Relief Valve Setting 24825 kPa (3600 psi)
D11T - Ripper (Pitch) Relief Valve Setting 22750 kPa (3300 psi)
D11T CD - Carrydozer Relief Valve Setting 24135 kPa (3500 psi)
D11T CD - Ripper (Pitch) Relief Valve Setting 24135 kPa (3500 psi)
D11T CD - Pump Output - Implement 670 l/min (177 gal/min)
D11T - Bulldozer Relief Valve Setting 22750 kPa (3300 psi)
D11T - Tilt Cylinder Relief Valve Setting 24300 kPa (3525 psi)
D11T - Ripper (Lift) Relief Valve Setting 22750 kPa (3300 psi)
D11T - Pump Type Gear-type pump
D11T CD - Pump Type Gear-type pump
Undercarriage
Shoe Type Extreme Service
Width - Shoe 710 mm (28 in)
Shoes/Side 41
Grouser Height 102 mm (4 in)
Pitch 318 mm (12.5 in)
Track Gauge 2896 mm (114 in)
Length - Track on Ground 4444 mm (175 in)
Ground Contact Area 6.3 mu00b2 (9781 inu00b2)
Track Rollers/Side 8
Number of Carrier Rollers 1 per side (optional)
Ground Contact Area - CD 8.1 mu00b2 (12605 inu00b2)
Width - Shoe - CD 915 mm (36 in)
Ground Clearance* 777 mm (30.6 in)
Service Refill Capacities
Fuel Tank 1609 l (425 gal (US))
Cooling System 269 l (71.1 gal (US))
Engine Crankcase* 103 l (27.2 gal (US))
Power Train 344 l (90.9 gal (US))
Final Drive - Each 47 l (12.4 gal (US))
Roller Frames - Each 94 l (24.8 gal (US))
Pivot Shaft Compartment 71 l (18.8 gal (US))
Implement Hydraulic System - Tank Only 223 l (58.9 gal (US))
Fuel Tank - High Capacity 1911 l (505 gal (US))
Track Roller Frame
Oscillation 351 mm (13.8 in)
Steering and Brakes
Spring Applied Multiple-disc Brake 612 mm (24.1 in)
Hydraulically Applied Multiple-disc Steering Clutch 440 mm (17.3 in)
Standards
FOPS Falling Objects Protective Structure (FOPS) meets the following criteria: ISO 3449:2005 LEVEL II.
ROPS Rollover Protective Structure (ROPS) meets the following criteria: SAE J1040 MAY94, ISO 3471:1994.
Dimensions (Approximate) - D11T
Length - With SU-Blade 8579 mm (337.8 in)
Dimensions (Approximate) - D11T CD
Track Gauge 2896 mm (114 in)
Width - Over Trunnions 4379 mm (172.4 in)
Note (2) **CD Blade on D11T CD.
Overall Length - SU-Blade/SS Ripper** 10712 mm (421.7 in)
Dimensions (Approximate) - D11T
Height - FOPS Cab* 4405 mm (173.4 in)
Hydraulic Controls
Note (2) Electro-hydraulic pilot valves assist operations of ripper and dozer controls.
Dimensions (Approximate) - D11T
Width - Without Trunnions - Standard Shoe 3782 mm (148.9 in)
Length - Track on Ground 4444 mm (175 in)
Length - With Single-Shank Ripper 8107 mm (319.2 in)
Weights
Note (4) D11T CD Shipping Weight: Base machine chassis with cab and pivot shaft. Doesn't include ROPS, ripper, blade, track, or roller frames.
Dimensions (Approximate) - D11T CD
Length - Track on Ground 4444 mm (175 in)
Engine
Note (2) Engine ratings apply at 1,800 rpm.
Dimensions (Approximate) - D11T
Track Gauge 2896 mm (114 in)
Weights
Note (1) D11T Operating Weight: Includes blade tilt cylinders, coolant, lubricants, full fuel tank, ROPS, FOPS cab, 11U ABR bulldozer, single-shank ripper with pin-puller, fast fuel, 710 mm (28 in) ES shoes, and operator.
Engine
Note (1) * Excludes all fan losses.
Dimensions (Approximate) - D11T
Note (1) *Includes grouser height for total dimensions on hard surfaces.
Weights
Note (3) D11T CD Operating Weight: Includes lubricant, coolant, full fuel tank, 915 mm (36 in) extreme service shoes, 11 Carrydozer, single-shank ripper, and operator.
Dimensions (Approximate) - D11T
Overall Length - Basic Tractor 6160 mm (242.5 in)
Service Refill Capacities
Note * With oil filters.
Dimensions (Approximate) - D11T
Width - Over Trunnions 4379 mm (172.4 in)
Standards
Sound (1) The operator Equivalent Sound Pressure Level (Leq) is 79 dB(A) when ISO 6396:2008 is used to measure the value for an enclosed cab. This is a dynamic cycle sound exposure level. The cab was properly installed and maintained. The test was conducted with the cab doors and the cab windows closed.
Weights
Note (2) D11T Shipping Weight: Base machine chassis with cab and pivot shaft. Doesn't include ROPS, ripper, blade, track, or roller frames.
Dimensions (Approximate) - D11T
Drawbar Height (Center of Clevis)* 942 mm (37.1 in)
Dimensions (Approximate) - D11T CD
Note (3) D11T shown equipped with 710 mm (28 in) shoes.
Dimensions (Approximate) - D11T
Height - Top of Stack* 4549 mm (179.1 in)
Length - With U-Blade 8641 mm (340.2 in)
Dimensions (Approximate) - D11T CD
Overall Length - Basic Tractor 6160 mm (242.5 in)
Length - Basic Tractor - With Drawbar 6160 mm (242.5 in)
Engine
Note (4) No derating required up to 3658 m (12,000 ft) altitude. High altitude attachment available for greater than 3658 m (12,000 ft).
Dimensions (Approximate) - D11T CD
Drawbar Height (Center of Clevis)* 942 mm (37.1 in)
Dimensions (Approximate) - D11T
Length - With Multi-Shank Ripper 8427 mm (331.8 in)
Ground Clearance* 798 mm (31.4 in)
Dimensions (Approximate) - D11T CD
Height - Top of Stack* 4549 mm (179.1 in)
Standards
Sound (2) The exterior sound pressure level for the standard machine measured at a distance of 15 m (49.2 ft) according to the test procedures specified in SAE J88 APR95, mid-gear-moving operation, is 87 dB(A).
Engine
Note (3) Net power advertised is the power available at the flywheel when the engine is equipped with air cleaner, muffler, alternator, fan, and engine emissions controls as required.
Undercarriage
Note (2) Sleeve Bearing Track with Positive Pin Retention.
Dimensions (Approximate) - D11T CD
Length - With Multi-Shank Ripper 8427 mm (331.8 in)
Height - FOPS Cab* 4405 mm (173.4 in)
Ground Clearance* 798 mm (31.4 in)
Dimensions (Approximate) - D11T
Length - Basic Tractor - With Drawbar 6160 mm (242.5 in)
Dimensions (Approximate) - D11T CD
Length - With SU-Blade** 8765 mm (345.1 in)
Dimensions (Approximate) - D11T
Overall Length - SU-Blade/SS Ripper 10525 mm (414.4 in)
Height - ROPS/Canopy* 4723 mm (185.9 in)
Dimensions (Approximate) - D11T CD
Height - ROPS/Canopy* 4723 mm (185.9 in)
Hydraulic Controls
Note (3) Complete system consists of pump, tank with filter, oil cooler, valves, lines, and control levers.
Undercarriage
Note (1) * Includes grouser height for total dimensions on hard surface.
Dimensions (Approximate) - D11T
Note (2) D11T shown equipped with 710 mm (28 in) shoes.
Dimensions (Approximate) - D11T CD
Length - With Single-Shank Ripper 8107 mm (319.2 in)
Note (1) *Includes grouser height for total dimensions on hard surfaces.
Service Refill Capacities
Fuel Tank - Platform Ready 1778 l (470 gal (US))
Dimensions (Approximate) - D11T CD
Width - Without Trunnions - Standard Shoe 3806 mm (149.8 in)
Hydraulic Controls
Note (1) Pump output measured at 1,800 engine rpm and 6895 kPa (1,000 psi).

Standard Equipment

  • ELECTRICAL
    • Alternator, 150 amp
    • Back up alarm
    • Batteries, 12-volt (4), 200 amp-hour
    • Converters, 12-volt, 10 amp and 20 amp
    • Diagnostic connector
    • Horn, forward warning
    • Lights, engine compartment
    • Lighting system, five (5) HID/seven (7) Halogen
    • Starting receptacle
  • OPERATOR ENVIRONMENT
    • Advisor-electronic monitoring system
    • Air conditioner and heater
    • Armrest, adjustable
    • Cab, FOPS
    • Deactivation switch, hydraulic controls
    • Decelerator, pedal
    • Finger Tip Control (FTC) steering
    • Governor switch, electronic
    • Hydraulic system: – Electronically controlled for bulldozer and ripper control
    • Mirror, rearview
    • Radio ready, entertainment
    • ROPS rollbar
    • Seat belt, retractable 76 mm (3 in)
    • Seat, cloth, air suspension
    • Wipers, intermittent, low and high speeds
  • POWER TRAIN
    • C32 with ACERT Technology: – 24-volt electric start
    • Aftercoolers, air-to-air
    • Air filters, dual with precleaner
    • Aluminum bar plate cooling system: – Serial number prefix: AMA and MDG
    • Controlled throttle shifting
    • Coolant, extended life
    • Shift management
    • Engine Idle Shutdown Timer
    • Engine precleaner
    • Ether starting aid, automatic
    • Four planet, double-reduction planetary final drives
    • Fuel priming pump, electric
    • High speed oil changing system
    • Hydraulic demand fan
    • Mesabi radiator: – Serial number prefix: JEL and JNS
    • Mufflers, dual
    • Parking brake, electronic
    • Prescreener
    • Separator, water/fuel
    • Thermal shields
    • Torque divider
    • Transmission, powershift: – (3F/3R speeds)
  • TECHNOLOGY
    • Auto blade assist
    • Enhanced auto shift
    • Product Link (satellite)
    • VIMS 3G
  • UNDERCARRIAGE
    • Equalizer bar end pin grease fittings, remote
    • Rollers and idlers, lifetime lubricated
    • Sprocket rim segments, replaceable
    • Suspension-type undercarriage, eight-roller tubular track roller frame
    • Three bolt idler and roller caps
    • Track adjusters, hydraulic
    • Track guides
    • Two-piece master links
  • SAFETY AND SECURITY
    • Anchorage points
    • Fender guard rails
    • Heavy duty steps and handles
    • Operator not present monitoring system
    • Slope and side-slope monitor
  • OTHER STANDARD EQUIPMENT
    • Bottom guards
    • CD ROM parts book
    • Dual-tilt blade control
    • Ecology drains
    • Engine enclosure
    • Fluid sampling ports
    • Grade control ready
    • Ground level service center
    • Ripper Hydraulics
    • Vandalism, protection (8 caplocks)

Optional Equipment

  • GUARDS
    • Bottom guards, sealed
    • Bottom guards, partial
    • Guard, undercarriage idlers
    • Screens, grill door
  • OPERATOR STATION
    • Air conditioner: – Fender – ROPS
    • Cab glass: – 276 kPa (40 psi) – Dual pane impact resistant
    • Heated and ventilated seat
    • Operator arrangement: – 5th percentile arrangement – Quick opening
    • Powered precleaner
    • Visibility arrangements (camera and mirrors): – Single camera – Dual camera – Mirrors
    • Window shades
  • POWER TRAIN
    • Engine coolant, arctic
    • Engine precleaner, turbine
    • Engine prelube
    • Fan arrangements: – Hydraulic screens – Reversing (Not available on D11T Carrydozer.) – Reversing with screens (Not available on D11T Carrydozer.)
    • Final drives: – Clamshell guard
    • High altitude arrangement (Not available on D11T Carrydozer.)
    • Mesabi radiator: – Serial number prefix: AMA and MDG
    • Remote power train and engine high speed oil change system located at the ground level service center
  • UNDERCARRIAGE
    • Carrier rollers
    • Carrier rollers – cold weather
    • Tracks, PPR, sealed and lubricated: – 710 mm (28 in) Extreme Service (Not available on D11T Carrydozer.) – 710 mm (28 in) Extreme Service abrasion resistant material (Not available on D11T Carrydozer.) – 710 mm (28 in) Extreme Service trapezoidal hole (Not available on D11T Carrydozer.) – 810 mm (32 in) Extreme Service – 810 mm (32 in) Extreme Service abrasion resistant material – 810 mm (32 in) Extreme Service trapezoidal hole – 810 mm (32 in) Extreme Service tall links – 810 mm (32 in) Extreme Service tall links abrasion resistant material – 810 mm (32 in) Extreme Service trapezoidal hole tall links – 915 mm (36 in) Extreme Service clipped – 915 mm (36 in) Extreme Service clipped abrasion resistant material – 915 mm (36 in) Extreme Service clipped trapezoidal hole – 915 mm (36 in) Extreme Service clipped tall links
    • Undercarriage arrangements: – Abrasion – Cold abrasion – Cold weather – Sound
  • BULLDOZER ATTACHMENTS
    • 11CD Abrasion resistant blade
    • 11CD No wear plate
    • 11SU Abrasion resistant blade (Not available on D11T Carrydozer.)
    • 11SU Abrasion resistant blade, black (Not available on D11T Carrydozer.)
    • 11SU No wear plate (Not available on D11T Carrydozer.)
    • 11U Abrasion resistant blade (Not available on D11T Carrydozer.)
    • 11U Abrasion resistant blade, black (Not available on D11T Carrydozer.)
    • 11U No wear plate (Not available on D11T Carrydozer.)
  • REAR ATTACHMENTS
    • Counterweight, rear
    • CapSure hammerless installation and positive retention system: – Single shank – Multi shank – Single shank deep
    • Drawbar, rear (Not available on D11T Carrydozer.)
    • Multi shank ripper: – Carrydozer – Leach Pad (Not available on D11T Carrydozer.) – Standard (Not available on D11T Carrydozer.)
    • Ripper lube
    • Single shank ripper: – Carrydozer/heavy – Push block (Not available on D11T Carrydozer.) – Standard (Not available on D11T Carrydozer.)
  • TECHNOLOGY
    • Command for Dozing (Installed by dealer.)
    • Machine control, performance: – AutoCarry – Automatic ripper control
    • Terrain for Grading: – With blade control
  • SAFETY AND SECURITY
    • Access arrangement (ladder and platform)
    • Fuel tank: – Platform ready – Extra capacity
    • Lights: – LED – LED, high intensity – Warning, strobe
    • Powered access ladder
    • Rear access platform
  • OTHER ATTACHMENTS
    • Automatic lubrication system
    • Grease points, grouped
    • Heater, engine coolant
    • Heater, fuel
    • Hydraulic lines, AutoCarry
    • Hydraulic lines, screens
    • Hydraulic lines, screens and AutoCarry

Related Models

D10T2 Dozer

D9T Dozer

Enquiry Form

    REQUEST A CALL BACK
    This site is protected by reCAPTCHA and the Google Privacy Policy and Terms of Service apply.

    Enquire about "D11T/D11T CD Dozer" Now