Enquire about "CM32E" Now
Reliable Operation
- Intensive cooling of key components including exhaust valve seats, injector cooling integrated into lube oil system
- Reliable, proven and high efficient single turbo charging system
- Classification society standards ensure high safety and quality
- Intelligent simplicity ensures a robust engine platform
- Optimized service schedules enable high availability and long durability
Control & Monitoring
- Ultrafast start time and load acceptance
- No engine start limitations
- Continuous power (base and peak load), prime power, stand-by
- Part load with high efficiency
- Monitoring for unattended operation
- Asset intelligence system
Ease Of Installation
- Reduced complexity of standard modular design allows an easy installation
- Low space requirements between the gensets
- Genset is ready for installation
- Generator set designed for direct elastic mounting
Ease Of Operation
- Low fuel and oil consumption
- Low maintenance requirements
- Operator and maintenance training courses available
Intelligent Simplicity
- High reliability, modular design and integral construction reduce the number of components by 40% over conventional designs e.g.:
- Dry engine block with integrated ducts for lubricating oil and charge air and underslung crankshaft
- Compact cylinder head design - Smart maintenance solutions:
- Easily removable cylinder heads, quick removable fluid connections
- Split connecting rods to allow fast and easy piston removal without disturbing the big end bearing
- Segmental camshaft design
- Simplified parts spectrum by using single-pipe exhaust gas
- Engine block free from cooling water - State-of-art material ensures long life time
Ease Of Maintenance
- Smart maintenance solutions allow an easy component accessibility
- Large inspection openings afford an easy serviceability to core engine internals
- Core engine components designed for reconditioning and reuse
- Short maintenance times enable high availability
- No engine removal necessary for maintenance and overhauls
Fuel
- Liquid: Light fuel oil (LFO), crude oil and heavy fuel oil (HFO) with fuel quality up to 700 cSt/50°C according to CIMAC H55/K55
- Dual:
- Light fuel oil (LFO), crude oil and heavy fuel oil (HFO) with fuel quality up to 700 cSt/50°C according to CIMAC H55/K55
- Natural gas with methane number > 80 and lower heating value of 28MJ/Nm3 - Gaseous: Natural gas with methane number > 80 and lower heating value of 31.5 MJ/Nm3
Emissions
- World bank emission certification (Stage 2)
- Technische Anleitung (TA) Luft (only gas)
- Post-emission treatment systems for lower emission requirements available
Expertise & Experience
- Assistance for planning
- delivery
- commissioning
- operation and service) - Expertise and experience for solutions to maximize benefits, e.g. combine heat and power systems (CHP)
Generator Set Specifications | |
---|---|
Minimum Rating | 3085 kWe |
Maximum Rating | 4630 kWe |
Emissions/Fuel Strategy | (WB) Cert stage 1 and 2 |
Voltage | 3000 to 13800 Volts |
Frequency At Speed | 50 Hz @ 750 / 60 Hz @ 720 |
Duty Cycle | Prime, Continuous |
Ready To Accept Loads (Preheated/Vented) | 40 s |
Normal Ramp Up To 100% Load | 95 s |
Emergency Ramp Up 10% To 100% Load | 30 s |
Genset Efficiency Up To | 46.40% |
Engine Specifications | |
---|---|
Engine Model | CM32E, 4-stroke-engine |
Bore | 320 mm (12.6 in) |
Stroke | 460 mm (18.11 in) |
Aspiration | Turbocharged-aftercooled |
Engine Rating Range | 3150 - 4725 kW |
Configuration | 6,8,9 cylinder |
Fuel Type | Diesel oil / heavy fuel oil (HFO) / crude oil |
Swept Volume | 37 l/cyl (2258 inu00b3) |
Mean Effective Pressure Up To | 23.7 bar (344 psi) |
Specific Fuel Oil Consumption (WB I) Up To | 178 g/kWh (0.392 Ib/kWh) |
Specific Fuel Oil Consumption (WB II) Up To | 178 g/kWh (0.392 Ib/kWh) |
Specific Lube Oil Consumption | 0.6 g/kWh (0.001 Ib/kWh) |
Generator Set Dimensions | |
---|---|
Length - Minimum | 9566 mm (377 in) |
Length - Maximum | 11156 mm (439 in) |
Width - Minimum | 2600 mm (102 in) |
Width - Maximum | 2600 mm (102 in) |
Height - Minimum | 4567 mm (180 in) |
Height - Maximum | 4770 mm (188 in) |
Dry Weight - Genset (minimum) | 71 ton (US) (156528 lb) |
Dry Weight - Genset (maximum) | 98 ton (US) (216053 lb) |
Standard Equipment
- Fuel System
- Gas valve unit (GVU) (only dual fuel (DF) and gas)
- Ignition fuel oil module (only dual fuel (DF))
- Circulation module
- Pre-pressure module
- Engine ventilation module (only dual fuel (DF) and gas)
- Separator module
- Lubricating Oil System
- Combined module: cooling water system and lube oil system
- Lube oil separator module
- Piping interface module
- Cooling Water System
- Cooling water system with radiators
- Combined module: see lube oil system
- Piping interface module
- Starting System
- Starting air compressor module
- Starting air receiver module
- Combustion Air System
- Air filter – oil bath
- Air filter – pocket
- Air filter – pulse
- Exhaust System
- Selective catalytic reduction (SCR) system
- Exhaust gas silencer
- Exhaust gas ventilation module (only dual fuel (DF) and gas)
- Oxidation catalytic (Oxicat) converter system
- Control & Monitoring System
- Motor control center module (MCC)
- Engine monitoring package
- Gas leak detection per cylinder (only dual fuel (DF) and gas)
- Local control panel (LCP)
- Local data panel (LDP) / generator control panel (GCP)
- Mounting System
- Elastic mounting – genset/engine