Enquire about "AP300D Paver with AS3173 Screed" Now
AP300D Paver with AS3173 Screed
When moving to the next starting point, a fast travel speed of up to 16 km/hr (10 mph), and tight outside turning radius of 1.65 m (5’ 5”) provides excellent mobility for quick movement around the job site. For enhanced traction on soft and hard base conditions, the front wheel assist option performs admirably.
Precise Material Control
Independent control of each auger and each conveyor leads to consistent material flow in front of the screed. A four sensor system allows the operator to fine tune mix delivery, while reversible augers and conveyors limit spillage and the end of the paving pass.
Dual operating stations slide out for better all-around visibility. Machine controls are conveniently positioned on a sliding control panel. The exhaust stack provides fumes evacuation above the canopy. The folding canopy is available with choice of mechanical or hydraulic assist, while quiet operation supports easy communication.
The hydraulically extendible AS3173 screed has a paving range of 1.7 m to 3.2 m (5’ 7” to 10’ 6”). When equipped with mechanical bolt-on extensions, it can pave up to 4.0 m (13′ 1″). A hydraulic paving reduction attachment narrows the paving width to 650 mm (26”).
The hydraulic system is equipped with grouped and centrally located solenoids. Manual overrides simplify troubleshooting by eliminating functioning systems. Large access doors provide quick and easy inspection. The electrical system is color-coded, numbered, and wrapped in kevlar braid for easy identification and durability. Product Link™ is available to maximize up-time, provide machine location, give hourly updates and schedule service requirements at more opportune times.
Cat® C4.4 Engine
The C4.4 meets emissions equivalent to U.S. EPA Tier 3 and E.U. Stage IIIA. It provides a gross power of 55.5 kW (74.4 hp).
Hydrostatic Propel System
The wheel undercarriage offers quick reacting speed control, responsive power, and high travel speeds up to 16 km/hr (10 mph) when moving around the job site.
The AP300D has a 3.8 cubic meter (134 cubic ft) hopper capacity. A wide hopper width of 3200 mm (10′ 6”) enables smooth truck delivery. Truck discharge height of 570 mm (22″) and adjustable push-roller easily accept a variety of trucking fleets. Independent hopper wing control simplifies operation next to buildings and other obstacles. Narrow chain guards and optimally spaced flight bars promote smooth mix flow.
Comprehensive controls and analog gauges enable the operator to easily monitor essential functions, while grouped toggle switches ensure efficiency and performance. An automatic speed control feature maintains paving speed for smoother mats. Warning indicators keep the operator informed of machine conditions and the electronic throttle provides on-demand control. The console is equipped with a 12 volt power receptacle that supports communication devices and the lockable vandal cover provides protection.
Electric Screed Heat
The electric heat control panel utilizes touch-pad technology and LED indicator lights to create a user-friendly interface. Three pre-set temperature settings for each screed section ensure even-heat distribution and manual adjustments provide override capability. On-board diagnostics enable the operator to verify fault indicators.
|Maximum Operating Weight||7400.0 kg (16314.0 lb)|
|Operating Weight||7400.0 kg (16314.0 lb)|
|Tractor Weight||6300.0 kg (13889.0 lb)|
|Standard Paving Width||1.7 m|
|Maximum Speed||30.0 m/min (98.0 ft/min)|
|Maximum Capacity||3.8 m3 (134.0 ft3)|
|Paving Width Minimum||650.0 mm (2.1 ft)|
|Paving Width Maximum||4000.0 mm (13.12 ft)|
|Standard Paving Range||1.7 m|
|Hopper Capacity||3.8 m3 (134.0 ft3)|
|Maximum Paving Speed with Vibratory Screed||30.0 m/min (98.0 ft/min)|
|Maximum Travel Speed||16.0 km/h (10.0 mph)|
|Paving Width||3200.0 mm (10.5 ft)|
|Paving Width Maximum||4.0 m (13.1 ft)|
|Paving Width Minimum||0.65 m (2.1 ft)|
|Truck Dump Height||480.0 mm (19.0 in)|
|Truck Entry Width||2850.0 m (9.33 ft)|
|Gross Power||55.5 kW (74.4 hp)|
|Engine Model||C4.4 ACERT|
|Wheelbase||1950.0 mm (6.45 ft)|
|Length on Ground||4818.9 mm (15.81 ft)|
|Length with push roller & screed||4.87 m (16.0 ft)|
|Overall height||3.48 m (11.5 ft)|
|Transport width (hoppers raised) with end gates with screed||1.82 m (6.0 ft)|
|Fuel Tank Capacity||110.0 L (29.0 gal)|
|Service Refill Capacities|
|Hydraulic Oil Tank||85.0 L (22.45 gal)|
|Cooling System (total)||15.0 L (3.96 gal)|