Enquire about "993K Wheel Loader" Now
993K Wheel Loader
Structures
Power Train
Hydraulics
Operator Station
Technology Solutions
Cat MineStar System
Safety
Serviceability
Customer Support
Sustainability
Bucket Ground Engaging Tools
System Match Efficiency
| Engine | |
|---|---|
| Net Power | 726 kW (973 HP) |
| Operating Specifications | |
|---|---|
| Operating Weight | 133668 kg (294687 lb) |
| Operating Weight - Tier 2 Equivalent* | 133668 kg (294687 lb) |
| Rated Payload - High Lift | 24.9 t (27.5 t) |
| Operating Weight* | 133668 kg (294687 lb) |
| Cat Truck Match - Standard Lift | 777 |
| Operating Weight - Tier 4 Final* | 133668 kg (294687 lb) |
| Rated Payload - Standard Lift | 27.2 t (30 t) |
| Cat Truck Match - High Lift | 777, 785 |
| Bucket Range | 12.2-23.7 m3 (16.0-31.0 yd3) |
| Articulation Angle | 43 u00b0 (43 u00b0) |
| Transmission | |
|---|---|
| Transmission Type | Cat Planetary Power Shift |
| Forward - 1 | 6.8 km/h (4.2 mile/h) |
| Forward - 2 | 11.9 km/h (7.4 mile/h) |
| Forward - 3 | 20.5 km/h (12.7 mile/h) |
| Reverse - 1 | 7.5 km/h (4.7 mile/h) |
| Reverse - 2 | 13.1 km/h (8.1 mile/h) |
| Reverse - 3 | 22.5 km/h (13.9 mile/h) |
| Direct Drive - Reverse 3 | 25.2 km/h (15.6 mile/h) |
| Direct Drive - Reverse 1 | 8 km/h (4.9 mile/h) |
| Direct Drive - Reverse 2 | 14.2 km/h (8.8 mile/h) |
| Direct Drive - Forward 3 | 22.8 km/h (14.1 mile/h) |
| Direct Drive - Forward 2 | 13 km/h (8 mile/h) |
| Direct Drive - Forward 1 | Lock-up disabled |
| Hydraulic System - Lift/Tilt | |
|---|---|
| Lift/Tilt System - Pump | Variable Piston |
| Cylinders - Lift/Tilt | Double-acting |
| Relief Valve Setting - Lift/Tilt | 29500 kPa (4200 psi) |
| Maximum Flow at 1,650 rpm | 1180 l/min (311 gal/min) |
| Tilt Cylinder - Bore | 235 mm (9.3 in) |
| Lift Cylinder - Bore | 267 mm (10.5 in) |
| Lift/Tilt System - Circuit | Positive Flow Control |
| Lift Cylinder - Stroke | 1682 mm (66.2 in) |
| Tilt Cylinder - Stroke | 1040 mm (40.9 in) |
| Hydraulic Cycle Times | |
|---|---|
| Lower | 3.8 s (3.8 s) |
| Rack Back | 2.4 s (2.4 s) |
| Lower Float Down | 3.1 s (3.1 s) |
| Total Hydraulic Cycle Time | 17.2 s (17.2 s) |
| Dump | 1.8 s (1.8 s) |
| Raise | 9.2 s (9.2 s) |
| Service Refill Capacities | |
|---|---|
| Fuel Tank | 2170 l (573.3 gal (US)) |
| Cooling System | 303.5 l (80.2 gal (US)) |
| Crankcase | 120 l (31.7 gal (US)) |
| Transmission | 196.9 l (52 gal (US)) |
| Hydraulic System - Tank Only | 553 l (146 gal (US)) |
| Differential - Final Drives - Front | 482 l (127.3 gal (US)) |
| Differential - Final Drives - Rear | 482 l (127.3 gal (US)) |
| Hydraulic System Factory Fill | 873 l (230 gal (US)) |
| Buckets | |
|---|---|
| Bucket Capacities | 12.2-23.7 m3 (16.0-31.0 yd3) |
| Axles | |
|---|---|
| Front | Fixed |
| Rear | Trunnion |
| Oscillation Angle | 10 degrees |
| Hydraulic System - Steering | |
|---|---|
| Total Steering Angle | 86 u00b0 (86 u00b0) |
| Maximum Flow at 1,985 rpm (6900 kPa/1,000 psi) | 505 l/min (133 gal/min) |
| Relief Valve Setting - Steering | 34500 kPa (5000 psi) |
| Steering System - Circuit | Closed |
| Steering System - Pump | Piston, variable displacement |
| Engine - Tier 4 Final | |
|---|---|
| Stroke | 162 mm (6.4 in) |
| Displacement | 32.1 l (1959 inu00b3) |
| Peak Torque - 1,250 rpm | 5470 N·m (4034 lb/ft) |
| Net Power - EEC 80/1269 | 726 kW (973 HP) |
| Net Power - SAE J1349 | 719 kW (964 HP) |
| Gross Power - SAE J1995 | 775 kW (1039 HP) |
| Bore | 145 mm (5.7 in) |
| Rated Speed | 1800 r/min (1800 r/min) |
| Net Power - ISO 9249 | 726 kW (973 HP) |
| Torque Rise | 33% |
| Net Power - ISO 14396 | 764 kW (1024 HP) |
| Emissions | U.S. EPA Tier 4 Final |
| Engine Model | Cat® C32 with ACERT™ Technology |
| Engine - Tier 2 Equivalent | |
|---|---|
| Stroke | 162 mm (6.4 in) |
| Gross Power - SAE J1995 | 777 kW (1041 HP) |
| Peak Torque - 1,250 rpm | 5470 N·m (4034 ft-lb) |
| Net Power - EEC 80/1269 | 726 kW (973 HP) |
| Bore | 145 mm (5.7 in) |
| Net Power - ISO 14396 | 764 kW (1024 HP) |
| Rated Speed | 1800 r/min (1800 r/min) |
| Net Power - ISO 9249 | 726 kW (973 HP) |
| Displacement | 32.1 l (1959 inu00b3) |
| Net Power - SAE J1349 | 719 kW (964 HP) |
| Emissions | U.S. EPA Tier 2 Equivalent |
| Torque Rise | 33% |
| Engine Model | Cat C32 with ACERT Technology |
| Sound | |
|---|---|
| Operator Sound Pressure - ANSI/SAE J1166 FEB08 | 72 dB(A) (72 dB(A)) |
| Dynamic Operator Sound Pressure Level (ISO 6396:2008) | 70 dB(A) (70 dB(A)) |
| Note (1) | Hearing protection may be needed when the machine is operated with a cab that is not properly maintained or when the doors or windows are open for extended periods or in a noisy environment. Hearing protection may be needed when the machine is operated with a cab that is not properly maintained or when the doors and windows are open for extended periods or in a noisy environment. |
| Engine - Tier 2 Equivalent | |
|---|---|
| Note | Standard ambient cooling. |
| Hydraulic System - Lift/Tilt | |
|---|---|
| Note | High Lift configuration. |
| Sound | |
|---|---|
| Note (3) | The machine sound power level is 113 dB(A), measured according to the test procedures and conditions specified in ISO 6395:2008 for the sound suppressed machine configuration. The measurement was conducted at 70 percent of the maximum engine cooling fan speed. |
| Operating Specifications | |
|---|---|
| Note | * High lift, 60/65-51 BFOR (311-1938), standard cooling, 13.8 m3 (18.0 yd3) bucket (496-9912). |
| Sound | |
|---|---|
| Note (2) | The machine sound power level is 116 dB(A), measured according to the test procedures and conditions specified in ISO 6395:2008 for the standard machine configuration. The measurement was conducted at 70 percent of the maximum engine cooling fan speed. |
| Service Refill Capacities | |
|---|---|
| Note | High Lift configuration. |
| Hydraulic Cycle Times | |
|---|---|
| Note | High Lift configuration, calculated speeds. |
| Transmission | |
|---|---|
| Note | 50/65-51 BFOR (311-1938), calculated speeds. |
| Engine - Tier 4 Final | |
|---|---|
| Note | Standard ambient cooling. |
Standard Equipment
- NOTE
- Standard and optional equipment may vary. Consult your Cat dealer for details.
- POWER TRAIN
- Brakes, oil-cooled, multi-disc, service/secondary
- Case drain filters
- Demand fan
- Driveline parking brake
- Engine, Cat C32 ACERT
- Fuel priming pump (electric)
- Ground level engine shutoff
- Precleaner, engine air intake (above hood)
- Radiator
- Starting aid, ether, automatic
- Throttle lock, electronic
- Torque converter, Impeller Clutch (ICTC) with Rimpull Control System
- Transmission, planetary powershift, 3F/3R electronic control
- ELECTRICAL
- Alarm, back-up
- Alternator, 150-amp
- Batteries, maintenance free, 4 – 1,400 CCA
- Deutsch terminal connectors
- Diagnostic connector starting and charging system
- Electrical system, 24 volt
- Electronic Service Center
- Electronic transmission control
- Lighting system, halogen (front and rear) lighting, access stairway
- Starter and charging system, 24V
- Starter receptacle for emergency start
- Starter and transmission lockouts (bumper)
- OPERATOR ENVIRONMENT
- Advisor Display, displays real time operating information, performs calibrations and customizes operator settings
- Air conditioner
- Air precleaner
- Cab, sound suppressed and pressurized, separate external rollover protective structure (ROPS/FOPS) radio ready for entertainment, includes antenna, speakers and converter (12-volt 10-amp) and power port
- Cigar lighter, ashtray
- Coat hook
- Controls, lift and tilt function
- Digital display on center console: – Gear – Ground speed – Machine hours
- Heater, defroster
- Horn, electric
- Instrumentation, gauges: – Coolant temperature – Fuel level – Hydraulic oil temperature – Power train oil temperature – Tachometer
- Light, cab, dome
- Lunchbox, beverage and manual holders
- Mirrors, rearview (externally mounted)
- Rimpull Control System
- Seat, Cat Comfort (cloth), air suspension, six-way adjustable
- Seat, trainer with lap belt, 76 mm (3 in) wide
- Seat belt, retractable, 76 mm (3 in) wide
- STIC Control System
- Transmission gear indicator
- Vital Information Management System (VIMS) with Advisor Display: External Data Port, Customizable Operator Profiles, Cycle Timer, Integrated Payload Control System
- Wet-Arm wipers/washers (front and rear): – Intermittent front and rear wipers
- OTHER
- Automatic bucket leveler
- Automatic lift and lower bucket kickout
- Axle ecology drain
- Bumper service center
- Deluxe filtration
- Emergency platform egress
- Front walkway
- Fuel, fast fill system
- Grouped hydraulic pressure ports
- Guards, crankcase and power train
- Hitch, drawbar with pin
- Implement and steering ecology drains
- Implement lock lever, cab
- Linkage pins, maintenance free
- Oil sampling valves
- Positive Flow Control implement system
- Product Link™
- Rims
- Service center with ground level electrical and fluid connections
- Sight gauges for steering, implement and transmission oil
- Stairway, left and right rear access
- Starter lockout, bumper
- Steering and transmission lock lever, cab
- Steering, load sensing
- Toe kicks
- Transmission lockout, bumper
Optional Equipment
- NOTE
- Standard and optional equipment may vary. Consult your Cat dealer for details.
- POWER TRAIN
- –50° C (–58° F) antifreeze
- Engine coolant heater (120V)
- Engine coolant heater (240V)
- ELECTRICAL
- LED warning strobe
- Object detection (radar)
- Power converter
- Rear vision camera
- OPERATOR ENVIRONMENT
- AM/FM/CD/MP3 radio
- Cab precleaner
- Satellite Sirius radio with bluetooth
- Sun screen
- MACHINE CONTROL AND GUIDANCE
- Cat Terrain ready
- SPARE RIMS
- 40.00×51 spare rim
- MISCELLANEOUS ATTACHMENTS
- Axle oscillation limit stop
- Egress, powered rear access
- Rear roading fenders