Enquire about "854K Wheel Dozer" Now
854K Wheel Dozer
Structures
Power Train
Hydraulics
Operator Station
Technology Solutions
Cat MineStar System
Safety
Serviceability
Customer Support
Sustainability
Blades
Engine | |
---|---|
Engine Model | Cat® C32 ACERT |
Gross Power | 676 kW (907 HP) |
Weights | |
---|---|
Operating Weight | 101720 kg (224254 lb) |
Engine | |
---|---|
Emissions (U.S. EPA Tier 4 Final): Gross Power - SAE J1995 | 671 kW (900 HP) |
Emissions (U.S. EPA Tier 4 Final): Net Power ISO - 9249 | 607 kW (814 HP) |
Emissions (Tier 2 Equivalent): Gross Power - SAE J1995 | 676 kW (907 HP) |
Emissions (Tier 2 Equivalent): Net Power ISO - 9249 | 607 kW (814 HP) |
Rated Speed | 1750 r/min (1750 r/min) |
Bore | 145 mm (5.7 in) |
Stroke | 162 mm (6.4 in) |
Displacement | 32.1 l (1958 inu00b2) |
Peak Torque - 1,200 rpm | 4242 N·m (3139 lb/ft) |
Torque Rise | 30 % (30 %) |
Note (1) | Net power advertised is the power available at the flywheel when the engine is equipped with fan, air cleaner, muffler and alternator. |
Note (2) | Net torque rise meets SAE J139. |
Note (3) | No engine derating required up to 3050 m (10,000 ft) altitude. |
Transmission | |
---|---|
Transmission Type | Cat Planetary Power Shift |
Converter Drive - Forward 1 | 7.1 km/h (4.4 mile/h) |
Converter Drive - Forward 2 | 12.4 km/h (7.7 mile/h) |
Converter Drive - Forward 3 | 21.2 km/h (13.2 mile/h) |
Converter Drive - Reverse 1 | 7.7 km/h (4.8 mile/h) |
Converter Drive - Reverse 2 | 13.5 km/h (8.4 mile/h) |
Converter Drive - Reverse 3 | 23.5 km/h (14.6 mile/h) |
Direct Drive - Forward 1 | Lock-up disabled |
Direct Drive - Forward 2 | 13 km/h (8.1 mile/h) |
Direct Drive - Forward 3 | 22.8 km/h (14.2 mile/h) |
Direct Drive - Reverse 1 | 8 km/h (5 mile/h) |
Direct Drive - Reverse 2 | 14.3 km/h (8.9 mile/h) |
Direct Drive - Reverse 3 | 25.1 km/h (15.6 mile/h) |
Note | Travel speeds based on 45/65-45 L-5 46 ply tires. |
Hydraulic System - Lift/Tilt | |
---|---|
Output at 1,850 rpm and 6900 kPa (1,000 psi) | 610 l/min (161 gal/min) |
Cylinders, Double Acting - Lift, Bore and Stroke | 177 mm u00d7 1760 mm (0.58 ft u00d7 5.8 ft) |
Cylinder, Double Acting - Tilt and Tip, Bore and Stroke | 267 mm u00d7 286 mm (0.88 ft u00d7 0.94 ft) |
Relief Valve Setting - Lift (Large Pump) | 22675 kPa (3289 psi) |
Relief Valve Setting - Tilt (Small Pump) | 24560 kPa (3560 psi) |
Service Refill Capacities | |
---|---|
Fuel Tank - Standard | 1562 l (413 gal (US)) |
Cooling System | 200 l (53 gal (US)) |
Crankcase | 120 l (32 gal (US)) |
Transmission | 169 l (45 gal (US)) |
Differential - Final Drives - Front | 369 l (98 gal (US)) |
Differential - Final Drives - Rear | 342 l (90 gal (US)) |
Hydraulic System - Implement and Brakes - Tank Only | 326 l (81 gal (US)) |
Hydraulic System - Steering and Engine Cooling Fan - Tank Only | 290 l (77 gal (US)) |
Axles | |
---|---|
Front | Fixed |
Rear | Oscillating at u00b110 degrees |
Maximum Single-Wheel Rise and Fall | 573 mm (22.6 in) |
Brakes | |
---|---|
Brakes | Meets ISO 3540:2011 |
Blades | |
---|---|
Blade Capacities | 25 to 45 mu00b3 (33 to 58 ydu00b3) |
Cab | |
---|---|
Air Conditioning | Standard air conditioning system contains environmentally friendly R134a refrigerant |
Cab - ROPS/FOPS (1) | Cat cab with separate ROPS/FOPS is standard in North America, Europe and Japan. |
Cab - ROPS/FOPS (2) | SAE J1040 MAY94, ISO 3471:2008, ISO 3471:2005 |
ROPS | ROPS meets SAE J1040 MAY94, ISO 3471:2008 and ISO 3471:1994 criteria. |
FOPS | FOPS meets SAE J231 JAN81 and ISO 3449:1992 Level II criteria. |
Sound Performance (1) | The dynamic operator sound pressure level is 71 dB(A) when ISO 6396:2008 is used to measure the value for an enclosed cab. |
Sound Performance (2) | The exterior sound pressure level for the standard machine measured at a distance of 15 m (49.2 ft) is 87 dB(A). |
Sound Performance (3) | Hearing protection may be needed when operating with open operator station & cab for extended periods or in noisy environment. |
Sound Performance (4) | The operator sound exposure Leq measured according to work cycle procedures specified in ANSI/SAE J1166 FEB08 is 71 dB(A). |
Steering | |
---|---|
Minimum Turning Radius | 9550 mm (31 ft) |
Total Steering Angle | 86 u00b0 (86 u00b0) |
Hydraulic Output at 1,850 rpm and 6900 kPa (1,000 psi) | 470 l/min (124 gal/min) |
Relief Valve Setting | 34500 kPa (5004 psi) |
Model 854K (Tier 4) | |
---|---|
Serial Number Prefix | KK6 |
Model 854K (Tier 2) | |
---|---|
Serial Number Prefix | RM6 |
Dimensions (Approximate) | |
---|---|
Height - Top of ROPS | 5590 mm (18.25 ft) |
Height - Top of Exhaust Pipe | 5234 mm (17.17 ft) |
Height - Top of Hood | 3984 mm (13 ft) |
Ground Clearance | 691 mm (27 in) |
Centerline of Front Axle to Hitch | 2945 mm (9.67 ft) |
Centerline of Rear Axle to Edge of Bumper | 4195 mm (13.75 ft) |
Wheel Base | 5890 mm (19.25 ft) |
Length - With Blade on Ground | 13405 mm (44 ft) |
Standard Equipment
- NOTE
- Standard and optional equipment may vary. Consult your Cat dealer for details.
- ELECTRICAL
- Alarm, back-up
- Alternator (150-amp)
- Batteries, low maintenance
- Deutsch & Amp Seal terminal connectors
- ECM diagnostic connector
- Ground level electrical disconnect
- Ground level starting receptacle for emergency start
- Lighting system, halogen (front and rear)
- Lighting, access stairway
- Starter, electric (heavy duty)
- Starting and charging system (24-volt)
- OPERATOR ENVIRONMENT
- Advisor display
- Air conditioner and heater with automatic temperature control
- Cab, sound suppressed, pressurized, rollover protective structure (ROPS/FOPS) Radio ready for (entertainment) includes antenna, speakers, and 1 × 12V converters (24-volt, 10 amp) for use with laptop/cell phone
- Cigar lighter and ashtray
- Coat hook
- Electro-hydraulic tilt and lift control system locks
- Heater and defroster
- Horn, electric
- Implement and steering lockouts
- VIMS 3G monitoring system:
– Action alert system, three category
– Instrumentation, gauges:
· Engine Coolant Temperature
· Fuel Level
· Hydraulic Oil Temperature
· Tachometer
· Transmission Gear Indicator
· Transmission Oil Temperature - Light, dome (cab)
- Lunchbox and beverage holders
- Mirrors, rearview (externally mounted)
- Seat belt, retractable, 76 mm (3 in) wide operator and trainer seats
- Seat, Cat Comfort (cloth) air suspension
- STIC control system
- Tinted glass
- Wet-arm wipers/washer (front, rear, and corners), intermittent front wipers
- POWER TRAIN
- Air-to-Air After cooler (ATAAC)
- Auto Idle Kickdown
- Axle oil coolers (front and rear)
- Brakes, fully hydraulic, enclosed, wet multiple disc service brakes and dry parking/secondary brake
- Case drain filters
- Delayed Engine Shutdown
- Demand fan
- Electric fuel priming pump
- Engine, Cat C32 ACERT
- Ground level engine shutdown
- Ground level fast fill fuel
- Ground level transmission lockout
- Ground level starter lockout
- Idle Engine Shutdown
- Precleaner, engine air intake
- Next Generation Modular Radiator (NGMR)
- Starting aid (ether), automatic
- Throttle lock
- Transmission, 533 mm (21 in) planetary, powershift with 3F/3R, electronic control
- Venturi Exhaust Stacks
- OTHER STANDARD EQUIPMENT
- Autolube
- Automatic bucket lift/tilt kickouts, electronically adjustable from cab
- Bumper service center
- Couplings, Cat O-ring face seals
- Doors, service access (locking)
- Emergency platform egress
- Fenders, steel (front and rear)
- Grouped hydraulic pressure ports
- Guards, power train and crankcase
- Hitch, drawbar with pin
- Hoses, Cat XT™ and XT-ES
- Hydraulic oil cooler
- Impeller clutch
- Implement and steering ecology drains
- Mufflers, under hood
- Oil sampling valves
- Piston pump case drain filters
- Electro-hydraulic blade controls
- Product Link™
- Service center with ground level electrical and fluids service center
- Sight gauges:
– Coolant level
– Implement oil level
– Steering oil level
– Transmission oil level - Starter lockout, bumper
- Stairway, left and right rear access
- Steering, load sensing
- Toe kicks
- Transmission lockout, bumper
- Vandalism protection caplocks
- Windshield cleaning platforms
- Venturi Stack
- TIRES, RIMS, AND WHEELS
- A tire must be selected from the mandatory attachments section. Base machine price includes a tire allowance.
- ANTIFREEZE
- Premixed 50 percent concentration of extended life coolant with freeze protection to –34° C (–29° F)
Optional Equipment
- NOTE
- Standard and optional equipment may vary. Consult your Cat dealer for details.
- BLADES
- Semi-U – 25.4 m³ (33.1 yd³)
- HD Semi-U – 25.4 m³ (33.1 yd³)
- Coal – 44.7 m³ (58.2 yd³)
- ELECTRICAL
- 10A converter
- HID lights
- Object Detection
- Rear vision camera
- LED strobe warning beacons
- OPERATOR ENVIRONMENT
- AM/FM/CD/MP3 radio
- Cab precleaner
- Sirius/USB/Bluetooth Radio
- Sun Screen
- STARTING AIDS
- Engine coolant 120V heater
- Engine coolant 240V heater
- MACHINE CONTROL AND GUIDANCE
- CAES attachment ready option
- MISCELLANEOUS ATTACHMENTS
- Arctic Antifreeze for protection to –50° C (–58° F)
- Diagnostic lines
- Roading fenders