Enquire about "6015B Hydraulic Shovel" Now
6015B Hydraulic Shovel
Powerful Engine
Optimized Truck Match
Productivity Enhancing Cat Buckets and G.E.T.
Proven Cat Cab Design
Cat Undercarriage Design
Robust Structures
Fuel Efficiency Technologies
Closed-Loop Swing System
Efficient Hydraulic System
Safety Enhancements
Cat Technology Solutions
Emissions Technology
Sustainability
Seamless Dealer Support
Serviceability
General | |
---|---|
Engine Output - SAE J1995 | 606 kW (813 HP) |
Bucket Payload | 14.6 t (16.1 ton (US)) |
Operating Weight | 140 t (154.3 ton (US)) |
Note | Specifications shown above apply to Backhoe configuration. A Frontless configuration is also available. |
Engine - U.S. EPA Tier 4 Final | |
---|---|
Engine Model | Cat® C27 |
Gross Power - SAE J1995 | 606 kW (813 HP) |
Net Power - SAE J1349 | 556 kW (746 HP) |
Engine - Cat C27 ACERT with Tier 4 Final Emission Standards | |
---|---|
Number of Cylinders | 12 |
Bore | 137.2 mm (5.4 in) |
Stroke | 152.4 mm (6 in) |
Displacement | 27 l (1648 inu00b3) |
Maximum Altitude - Without Deration - Above Sea Level | 3048 m (10000 ft) |
Engine - Equivalent to U.S. EPA Tier 2 | |
---|---|
Engine Model | Cat® C27 |
Gross Power - SAE J1995 | 606 kW (813 HP) |
Net Power - SAE J1349 | 556 kW (746 HP) |
Engine - Cat C27 ACERT with Tier 1 or Tier 2 Equivalent Emission Standards | |
---|---|
Number of Cylinders | 12 |
Bore | 137.2 mm (5.4 in) |
Stroke | 152.4 mm (6 in) |
Displacement | 27 l (1648 inu00b3) |
Aspiration | Turbocharged and aftercooled |
Maximum Altitude - Without Deration - Above Sea Level | 4420 m (14500 ft) |
Engine | |
---|---|
Emissions | U.S. EPA Tier 4 Final, Tier 2 Equivalent or Tier 1 Equivalent |
Operating Weights - Backhoe | |
---|---|
Operating Weight | 140 t (154 ton (US)) |
Weights | |
---|---|
Ground Pressure | 16.3 N/cmu00b2 (23.6 psi) |
Note | Operating weight includes: 700 mm (28 in) track shoes, 7.6 m (24 ft 11 in) boom, 3.4 m (11 ft 2 in) stick |
Track | |
---|---|
Standard | 700 mm (28 in) |
Wide | 900 mm (36 in) |
Extra Wide | 1000 mm (39 in) |
Number of Shoes - Each Side | 46 |
Number of Track Rollers - Each Side | 9 |
Number of Carrier Rollers - Each Side | 3 |
Track Pads | Double grouser |
Drive | |
---|---|
Travel Speed - Two Stages - 1st Stage - Maximum | 2.3 km/h (1.4 mile/h) |
Travel Speed - Two Stages - 2nd Stage - Maximum | 3.3 km/h (2.1 mile/h) |
Maximum Drawbar Pull - Forward | 858 kN (192886 lbf) |
Maximum Drawbar Pull - Reverse | 983 kN (220987 lbf) |
Gradeability - Travel Drives | Approximately 42% |
Hydraulic Track Tensioning | With accumulator |
Service Refill Capacities | |
---|---|
Fuel Tank | 1700 l (449 gal (US)) |
Cooling System | 165 l (44 gal (US)) |
Engine Oil | 87 l (23 gal (US)) |
Swing Drive | 9 l (2.4 gal (US)) |
Hydraulic System - Including Tank | 1752 l (463 gal (US)) |
Hydraulic Tank | 956 l (253 gal (US)) |
Grease Tank | 68 l (18 gal (US)) |
Electrical System | |
---|---|
System Voltage | 24V |
Batteries | 4 u00d7 200Ah (12V each) |
Alternator Rating | 150A (24V) |
Components (1) | Emergency stop in cabin, engine module, pump room and on service station accessible from ground level |
Components (2) | All around lighting |
Components (4) | Five (5) lights for front |
Components (9) | One (1) beacon light on cabin roof |
Components (8) | One (1) light for machine deck/service |
Components (6) | One (1) light for right side |
Components (3) | Four (4) lights on attachment |
Components (5) | Two (2) lights for left side |
Components (7) | Two (2) lights for rear end |
Hydraulic System | |
---|---|
Main Pumps - Maximum Pressure - Travel | 320 bar (4641 psi) |
Main Pumps - Maximum Pressure - Attachment | 320 bar (4641 psi) |
Main Pumps - Maximum Total Oil Flow | 1544 l/min (407 gal/min) |
Main Pumps | 3 u00d7 variable swash plate pumps |
Swing Pump - Maximum Flow - Swing | 479 l/min (127 gal/min) |
Swing Pump | 1 u00d7 variable swash plate pump |
Swing Pump - Maximum Pressure - Swing | 365 bar (5294 psi) |
Pilot Pump - Maximum Pressure, Pilot | 95 bar (1378 psi) |
Pilot Pump | 1 u00d7 gear pump |
Pilot Pump - Maximum Flow, Pilot | 153 l/min (40.4 gal/min) |
Engine Fan Pump - Maximum Pressure, Engine Fan | 220 bar (3191 psi) |
Engine Fan Pump | 1 u00d7 variable swash plate pump |
Engine Fan Pump - Maximum Flow, Engine Fan | 201 l/min (53.1 gal/min) |
Hydraulic Fan Pump - Maximum Flow, Hydraulic Fan | 86 l/min (22.7 gal/min) |
Hydraulic Fan Pump | 1 u00d7 variable swash plate pump |
Hydraulic Fan Pump - Maximum Pressure, Hydraulic Fan | 135 bar (1958 psi) |
Hydraulic Oil Cooling - Diameter of Fan | 1016 mm (40 in) |
Hydraulic Oil Cooling - Maximum Flow | 1075 l/min (284 gal/min) |
Filters (1) | Full-flow high-pressure filters (200 u03bcm) for main pumps |
Filters (2) | Full-flow filters (20 u03bcm) for complete return circuit |
Filters (3) | Pressure filters (16 u03bcm) for servo circuit |
Filters (5) | Swing charge filter (15 u03bcm) |
Filters (6) | Pump case return screens (125 u03bcm) |
Filters (4) | Full-flow filters (6 u03bcm) for engine cooling return circuit |
Swing System | |
---|---|
Swing Drive | Two (2) compact planetary transmissions with axial piston motors |
Parking Brake | Wet multiple disc brake, spring-loaded/hydraulically released |
Maximum Swing Speed | 4.9 r/min (4.9 r/min) |
Swing Ring | Cross roller bearing with sealed internal gearing |
Features (1) | Closed-loop swing circuit with speed control |
Features (2) | Hydraulic braking of swing motion when control is returned to neutral position or by counteracting control for stronger braking |
Features (3) | All raceways and the internal gearing of swing ring supplied by automatic central lubrication system |
Centralized Service Area | |
---|---|
Feature | Accessible from ground level |
Equipped With (1) | Emergency stop |
Equipped With (2) | Quick couplings for: u2013 Diesel fuel u2013 Grease |
Undercarriage | |
---|---|
Travel Speed - Two Stages - 1st Stage - Maximum | 2.3 km/h (1.3 mile/h) |
Travel Speed - Two Stages - 2nd Stage - Maximum | 3.3 km/h (2.1 mile/h) |
Maximum Drawbar Pull - Forward | 858 kN (192886 lbf) |
Maximum Drawbar Pull - Reverse | 983 kN (220987 lbf) |
Gradeability - Travel Drives | Approximately 42% |
Hydraulic Track Tensioning | With accumulator |
Number of Shoes - Each Side | 46 |
Number of Track Rollers - Each Side | 9 |
Number of Carrier Rollers - Each Side | 3 |
Components (2) | Chain links connected by hardened pins and bushings |
Components (5) | Fully hydraulic self-adjusting track tensioning system with accumulator |
Components (7) | Audible travel alarm |
Components (3) | Cat D11 Track-Type Tractor links |
Components (6) | Automatic hydraulic retarder valve to prevent overspeed on downhill travel |
Components (1) | Forged double-grouser track pads |
Components (4) | All running surfaces of sprockets, idlers, rollers and track chain links hardened |
Operator's Cab | |
---|---|
Components (7) | Beverage holder |
Components (4) | Glass-breaking safety hammer |
Components (19) | Laminated glass front upper window and tempered other windows |
Components (14) | Adjustable armrest |
Components (9) | AM/FM radio |
Components (17) | Travel control pedals with removable hand levers |
Components (15) | Height-adjustable joystick consoles |
Components (10) | Radio with MP3 auxiliary audio port |
Components (16) | Neutral lever (lock out) for all controls |
Components (1) | Pressurized operator station with positive filtration |
Components (2) | Mirror package |
Components (11) | Two stereo speakers |
Components (12) | Storage shelf suitable for lunch or toolbox |
Components (8) | Literature holder |
Components (18) | Two power outlets, 10 amp (total) |
Components (6) | Coat hook |
Components (5) | Removable lower windshield with in cab storage bracket |
Components (13) | Color LCD display with warning, filter/fluid change, and working hour information |
Components (3) | Sliding upper door window (left-hand cab door) |
Automatic Lubrication System | |
---|---|
Capacity - Grease Barrel | 68 l (18 gal (US)) |
Type (2) | Grease is automatically applied to all attachment pivot points (except bucket linkage) and slew bearing |
Type (3) | Standard grease reel on machine for bucket linkage |
Type (1) | Central bank lubrication system |
Type (4) | Grease refill service point accessible from ground |
Attachments | |
---|---|
Type (1) | Boom and stick torsion-resistant with welded box design |
Type (2) | High-tensile steel with solid steel castings at pivot areas |
Type (3) | Boom and stick stress-relieved after welding |
Type (4) | Float valve for boom down function |
Buckets Equipped With | u2013 Special liner material covering main wear areas inside and outside u2013 Lip shrouds u2013 Wing shrouds u2013 Heel shrouds |
Backhoe Attachment (BH) - Working Range | |
---|---|
Maximum Digging Depth | 7.9 m (25.9 ft) |
Maximum Digging Reach | 13.9 m (45.6 ft) |
Maximum Digging Height | 13.2 m (43.3 ft) |
Maximum Dump Height | 8.7 m (28.5 ft) |
Backhoe Attachment (BH) - Digging Forces | |
---|---|
Bucket Digging Force - SAE | 501 kN (112600 lbf) |
Stick Digging Force - SAE | 439 kN (98800 lbf) |
Bucket Digging Force - ISO | 586 kN (131700 lbf) |
Stick Digging Force - ISO | 458 kN (103000 lbf) |
Backhoe Attachment (BH) - Backhoe | |
---|---|
Tooth System | Cat C70 penetration tip with CapSure lock |
Capacity 1:1 | 8.1 mu00b3 (10.6 ydu00b3) |
Total Width | 2682 mm (8.8 ft) |
Number of Teeth | 5 |
Weight - Including Standard Wear Package | 7528 kg (16596 lb) |
Maximum Material Density - Loose | 1.8 t/mu00b3 (3034 lb/ydu00b3) |
Weights | |
---|---|
Operating Weight | 140000 kg (308650 lb) |
Operating Specifications | |
---|---|
Bucket Payload | 14.6 t (16 ton (US)) |
Bucket | |
---|---|
Standard Bucket Capacity - Backhoe (Heaped 1:1) | 8.1 mu00b3 (10.6 ydu00b3) |
Engine | |
---|---|
Gross Power - SAE J1995 | 606 kW (813 HP) |
Operating Specifications | |
---|---|
Operating Weight | 140 t (154 ton (US)) |
Engine - Cat C27 ACERT with Tier 4 Final Emission Standards | |
---|---|
Net Power - SAE J1349 | 556 kW (746 hp 1,800 min-1) |
Engine - Cat C27 ACERT with Tier 1 or Tier 2 Equivalent Emission Standards | |
---|---|
Net Power - SAE J1349 | 556 kW (746 hp 1,800 min-1) |
Gross Power - SAE J1995 | 606 kW (813 hp 1,800 min-1) |
Engine | |
---|---|
Net Power - SAE J1349 | 556 kW (746 HP) |
Engine - Cat C27 ACERT with Tier 4 Final Emission Standards | |
---|---|
Gross Power - SAE J1995 | 606 kW (813 hp 1,800 min-1) |
Engine | |
---|---|
Engine Model | Cat® C27 |
Optional Equipment
- UNDERCARRIAGE
- Track guards – full
- Track guards – center
- Track width: – Standard – 700 mm (28 in) – Wide – 900 mm (36 in) – Extra Wide – 1000 mm (39 in)
- COLD WEATHER OPTIONS
- Starting aid – cold weather
- 120V or 240V engine heater
- Fuel heater
- Heated cab mirror
- Low temperature lubricants
- SUPERSTRUCTURE
- Copper Mesabi or aluminum bar plate engine cooling packages
- LED working lights
- Powered access stairway
- Camera system
- CAB
- Windshield guard (FOGS)
- Product Link
- ATTACHMENT
- 3.4 m (11 ft 2 in) or 4.1 (13 ft 5 in) stick
- BUCKETS
- Additional buckets available, based on application, through your local Cat dealer