Enquire about "3516E High Voltage Generator Set" Now
3516E High Voltage Generator Set
Cat Diesel Engine
Generator
Cat EMCP Control Panel
The EMCP controller features the reliability and durability you have come to expect from your Cat equipment. EMCP4 is a scalable control platform designed to ensure reliable generator set operation, providing extensive information about power output and engine operation. EMCP4 systems can be further customized to meet your needs through programming and expansion modules.
Seismic Certification
Design Criteria
The generator set accepts 100% rated load in one step per NFPA 110 and conforms to the ISO 8528-5:2013 G3 for load acceptance & steady state.
Single-Source Supplier
Fully prototype tested with certified torsional vibration analysis available
World Wide Product Support
Cat Dealers provide extensive post sale support including maintenance and repair agreements. Cat dealers have over 1,800 dealer branch stores operating in 200 countries. The Cat® SOSSM program cost effectively detects internal engine component condition, even the presence of unwanted fluids and combustion by-products.
Generator Set Specifications | |
---|---|
Minimum Rating | 2500 ekW |
Maximum Rating | 2750 eKW |
Voltage | 4160 to 13800 volts |
Frequency | 60 Hz |
Speed | 1800 RPM |
Generator Set Configurations | |
---|---|
Emissions/Fuel Strategy | US. EPA Stationary Emergency Use Only (Tier 2) |
Engine Specifications | |
---|---|
Engine Model | 3516E, SCAC, V-16, 4-Stroke, Water-Cooled Diesel |
Bore | 170 mm (6.69 in) |
Stroke (HD) | 215 mm (8.46 in) |
Compression Ratio | 14.3:1 |
Aspiration | ATAAC |
Governor Type | Adem A5 |
Fuel System | MEUI |
Standard Equipment
- Air Inlet
- Air Cleaner
- Cooling
- Package mounted radiator
- Exhaust
- Exhaust flange outlet
- Fuel
- Primary fuel filter with integral water separator
- Secondary fuel filter
- Fuel priming pump
- Generator
- Matched to the performance and output characteristics of Cat engines
- IP23 Protection
- Power Termination
- Bus Bar
- Control Panel
- EMCP 4.2B or EMCP 4.3 Genset Controller
- General
- Paint – Caterpillar Yellow except rails and radiators gloss black
- Starting/Charging
- Heavy-duty starting system
- Charging alternator
Optional Equipment
- Exhaust
- Exhaust mufflers
- Exhaust expanders
- Flexible fittings
- Generator
- Anti-condensation heater
- Excitation: [ ] Permanent Magnet Excited (PM)
- Power Termination
- Circuit breakers, IEC compliant
- Control Panels
- EMCP (4.3) (4.4)
- Generator temperature monitoring & protection
- Load share module
- Digital I/O module
- Remote monitoring software
- Mounting
- Rubber anti-vibration mounts
- Spring-type vibration isolator
- IBC isolators
- Starting/Charging
- Battery chargers
- Oversize batteries
- Jacket water heater
- Air Starting
- General
- The following options are based on regional and product configuration:
- Seismic Certification per applicable building codes: IBC 2000, IBC 2003, IBC 2006, IBC 2009, CBC 2007
- EU Certificate of Conformance (CE)
- EEC Declaration of Conformity
- Enclosures: sound attenuated, weather protective
- Automatic transfer switches (ATS)
- Integral & sub-base fuel tanks